History of SATA Box (Open)(No. 1)

History
View the source.
SATA Box (Open) has been deleted.
- 1 (2009-09-08 (Tue) 17:43:03)
- 2 (2009-09-08 (Tue) 18:40:18)
- 3 (2009-09-10 (Thu) 12:24:27)

[[ SATA box ????(??)]]

2008.10 ?? flex ????????SATA?HDD?Box ?????????

2008.10.25?by R. Saito

SATA box ???????????????? sata_sil24???????????? si3132r5.ko???????????????????????? ?????????????????????????????

???
PCIe interface ????????driver ????
Linux Kernel ? driver module ?????
??????device ???????
?Partition????
?Partition ???????
?file system ?????
/home2 ????
??????

???†

Century?Corp. ????????SATA?????????
HDD 1TB x 4
http://www.century.co.jp/

↑

PCIe interface ????????driver ????†

Silicon Image ??? driver ???????????

???????????????FLEX????

/home/skel/driver/sil3132/si3132r5_RHEL43_32bit_v1087_driver_and_GUI.tar.gz

Silicon Image ????????????

Support????????????????????????

Step 1 : Sil3132 - PCI Express (1x) to 2 Port SATA300
Step 2 : Driver
Step 3 : Linux 32-bit

Go????

Support Search Results
Product: SiI3132 - PCI Express (1x) to 2 Port SATA300
Category: Driver
O/S: Linux 32-bit

???????????????????????????????????? ?????2008?10?25????????32bit?CentOS???????

SiI 3132 32-bit Red Hat Enterprise Linux 4.0 Update 3 SATARAID5
Management Utility & Driver for 32bit AMD and 32bit EMT64T
Version : 1.0.8.7
Date : 11/19/2006

??????????????

?????????

tar zxf si3132r5_RHEL43_32bit_v1087_driver_and_GUI.tar.gz 
cd driver

?????????

cat modules.cgz | gunzip | cpio -ivH crc

FLEX??SMP?CPU????????????????????????????

cd 2.6.9-34.ELsmp
cp /lib/modules/`uname -r`/kernel/drivers/scsi si3132r5.ko
cd /lib/modules/`uname -r`/kernel/drivers/scsi

↑

Linux Kernel ? driver module ?????†

???????flex ????????????
uname -a ?????Kernel????????????
???????????????

cd /lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/scsi

module ???

lsmod

module ?????rmmod ?????????

??sata_sil24?????????????????????????????????????????????

rmmod sata_sil24

module ????

insmod si3132r5.ko

???????????module??????????/etc/modprobe.conf?????

modprobe.conf????????scsi_hostadapter1??????modprobe.conf??????????????????????????????????????

alias scsi_hostadapter1 sata_sil24 <- ??????
alias scsi_hostadapter1 si3132r5 <- ??

?????????????????????????????????

↑

??????device ???????†

??????????????????????????
???????????/dev/sde ????????????????
???SATA?box ????LED??????
????????SCSI ??????

flex48:scsi% cat /proc/scsi/scsi

?Attached devices:

Host: scsi0 Channel: 00 Id: 00 Lun: 00
 Vendor: ATA      Model: HDT722525DLA380  Rev: V44O
 Type:   Direct-Access                    ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
 Vendor: ATA      Model: HDT722525DLA380  Rev: V44O
 Type:   Direct-Access                    ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
 Vendor: ATA      Model: HDT722525DLA380  Rev: V44O
 Type:   Direct-Access                    ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 00 Lun: 00
 Vendor: ATA      Model: HDT722525DLA380  Rev: V44O
 Type:   Direct-Access                    ANSI SCSI revision: 05
Host: scsi8 Channel: 01 Id: 31 Lun: 00
 Vendor: SI       Model: Pseudo Device    Rev: 0000
 Type:   Processor                        ANSI SCSI revision: 05
Host: scsi8 Channel: 01 Id: 00 Lun: 00
 Vendor: WDC WD10 Model: EACS-00D6B0      Rev: 01.0
 Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi8 Channel: 01 Id: 01 Lun: 00
 Vendor: WDC WD10 Model: EACS-00D6B0      Rev: 01.0
 Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi8 Channel: 01 Id: 02 Lun: 00
 Vendor: WDC WD10 Model: EACS-00D6B0      Rev: 01.0
 Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi8 Channel: 01 Id: 03 Lun: 00
 Vendor: WDC WD10 Model: EACS-00D6B0      Rev: 01.0
 Type:   Direct-Access                    ANSI SCSI revision: 02

WDC ?????????????
/dev/sde, /dev/sdf, /dev/sdg, /dev/sgh ????

↑

?Partition????†

fdisk ?????????Linux ?file system ????

[root@flex scsi]# tcsh
[rsaito@flex scsi]$ setenv LANG C
[rsaito@flex scsi]$ fdisk /dev/sdf
Device contains neither a valid DOS partition table, nor Sun, 
SGI or OSF  disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

????????partition ??????????????????OK?

The number of cylinders for this disk is set to 121601.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
  (e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

n ???????????????p primary 1?????????????

Command (m for help): n
Command action
  e   extended
  p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-121601, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-121601, default 121601):
Using default value 121601

m ????????????????

Command (m for help): m
Command action
  a   toggle a bootable flag
  b   edit bsd disklabel
  c   toggle the dos compatibility flag
  d   delete a partition
  l   list known partition types
  m   print this menu
  n   add a new partition
  o   create a new empty DOS partition table
  p   print the partition table
  q   quit without saving changes
  s   create a new empty Sun disklabel
  t   change a partition's system id
  u   change display/entry units
  v   verify the partition table
  w   write table to disk and exit
  x   extra functionality (experts only)

p: ????? partition ???

Command (m for help): p
???
Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
???
  Device Boot      Start         End      Blocks   Id  System
/dev/sdf1               1      121601   976760001   83  Linux

w: ??????HDD??????

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

??????????????????

↑

?Partition ???????†

mke2fs ?????????-j ??ext3 ????????????????

[rsaito@flex scsi]$ mke2fs -j /dev/sdf
mke2fs 1.35 (28-Feb-2004)
/dev/sdf is entire device, not just one partition!
Proceed anyway? (y,n) y
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
122109952 inodes, 244190646 blocks
12209532 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=247463936
7453 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
       32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
       4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
       102400000, 214990848

inode table ????????????????

Writing inode tables: 3783/7453

???superblock ??filesystem ?????????????????

Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.

?????file system ???????????????

↑

?file system ?????†

/mnt ?????????????????????mkdir ????

[rsaito@flex scsi]$ cd /mnt
[rsaito@flex /mnt]$ ls
cdrom  fd  home  home2  root  rsaito-old  samba  sata1  www
[rsaito@flex /mnt]$ mkdir sata2
[rsaito@flex /mnt]$ mount /dev/sdf /mnt/sata2
[rsaito@flex /mnt]$ df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/mapper/VG-LVroot
                      20642428   6770492  12823488  35% /
/dev/md0                101018     77539     18263  81% /boot
none                   2037136         0   2037136   0% /dev/shm
/dev/mapper/VG-LVrsaito
                      30963708  12565892  16824952  43% /rsaito
/dev/mapper/VG-LVhome
                     216745980 201390404   4345528  98% /home
/dev/mapper/VG-LVwww  20642428   5947524  13646328  31% /www
172.17.4.129:/pmphdd1
                     480719072 161512480 294787392  36% /pmphdd
/dev/mapper/VG-LVsamba
                      20642428  11212352   8381500  58% /samba
172.17.4.134:/home1  236347936 201413376  22928784  90% /misc/home1
/dev/sdf             961434656    110656 912485872   1% /mnt/sata2

/mnt/sata2 ???????????
????????????????

[rsaito@flex /mnt]$ umount /mnt/sata2
[rsaito@flex /mnt]$ df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/mapper/VG-LVroot
                      20642428   6770492  12823488  35% /
/dev/md0                101018     77539     18263  81% /boot
none                   2037136         0   2037136   0% /dev/shm
/dev/mapper/VG-LVrsaito
                      30963708  12565892  16824952  43% /rsaito
/dev/mapper/VG-LVhome
                     216745980 201390404   4345528  98% /home
/dev/mapper/VG-LVwww  20642428   5947524  13646328  31% /www
172.17.4.129:/pmphdd1
                     480719072 161512480 294787392  36% /pmphdd
/dev/mapper/VG-LVsamba
                      20642428  11212352   8381500  58% /samba
172.17.4.134:/home1  236347936 201413376  22928784  90% /misc/home1

?????????/dev/sde, /dev/sdf, /dev/sdg, /dev/sdh ???????

↑

/home2 ????†

autofs ??/misc/sata1/home2 ? automount
/etc/auto.misc ???

home1 -w 172.17.4.134:/home1 home3 -w 172.17.4.136:/home sata1 -fstype=ext3 :/dev/sde

????????
autofs ?????/etc/rs5.d

[root@flex rc5.d]# ./S28autofs restart
automount ????:                                        [  OK  ]
automount ????:                                        [  OK  ]

df -B G ????????

# cd /misc/sata1
# df -B G     (G byte ??????

[root@flex /]# df -B G
Filesystem           1G-????    ??   ??? ??% ??????
/dev/mapper/VG-LVroot
                           20G        7G       13G  35% /
/dev/md0                    1G        1G        1G  81% /boot
none                        2G        0G        2G   0% /dev/shm
/dev/mapper/VG-LVrsaito
                           30G       12G       17G  43% /rsaito
/dev/mapper/VG-LVhome
                          207G      193G        5G  98% /home
/dev/mapper/VG-LVwww       20G        6G       14G  31% /www
172.17.4.129:/pmphdd1
                          459G      155G      282G  36% /pmphdd
/dev/mapper/VG-LVsamba
                           20G       11G        8G  58% /samba
/dev/sde                  917G       16G      855G   2% /misc/sata1

tar ????????? /home2 ?????/misc/sata1/home2 ????

[root@flex home2]# pwd
/home2
[root@flex home2]# nohup tar cf - ./ | (cd /misc/sata1/home2; tar xpf -) &

nohup ??logout ???JOB??????
????/home2 ??????????????

↑

??????†

↑

/dev/sde -> /misc/sata1†

sata1 ???
- /home2 ???????500G????
- /home1 ??????300G????

↑

?tube ??/home1 ???????????????SATA?BOX???????†

??????????????????192.168.1.0???Flex?????????

/home2 ?2008.8?????

FLEX??mount????
172.17.4.129:/pmphdd1 on /pmphdd type nfs (rw,addr=172.17.4.129) 
??????HDD???

↑

History of SATA Box (Open) (No. 1)