History of PXE Server for New Tube (Open)(No. 11)

Current status: Two new directories i.e. sys1 and sys2 created.

location: /nfstpboot/sys1 and /nfstpboot/sys2
Using rsync command system files were copied into sys1. After that from sys1 we copied root into sys2 directory.
we successfully created diskless environmet for client computers. See below for details about the procedure.
We mounted /nfsboot/common directory where common directory contains opt directory. See (Mount /nfsboot/sys1/opt) at the bottom of this page for details.

Current problem: How can we manage main directories nicely under /nfsboot/common, i.e. /usr and /opt, so that they can be shared for many client machines?

We want to make a diskless computing system so that we need a PXE Server. PXE stands for "Pre-boot eXecution Environment". PXE is a special extension of services provided by the Dynamic Host Configuration Protocol (DHCP). It uses a Trivial File Transfer Protocol (TFTP) server to provide minimal boot to a network client. Let's try to configure it!

Small subnet for testing DHCP
- What we need
- Checking
  - Network setting
  - SSH check
Setting for the PXE server machine
Set PXE client
Mount /nfsboot/sys1/opt
Problem and Solution

Small subnet for testing DHCP†

↑

What we need†

A computer with linux operating system to be configured as a server. Here we use Fedora Linux. This computer should have at least two network interface cards (NIC). One of the cards will be used to connect the server with client.
Computer that acts as a client. For a checking purpose we need this computer to have SSH facility (it does not matter to use Windows or Linux).
Network hub and cables.

↑

Checking†

↑

Network setting†

Turn on the hub, connect a network cable from Fedora Linux computer (PXE server) to the hub (e.g. to channel 1)
Note: From now we will address this Fedora Linux machine as PXE Server although it is not configured yet as PXE server.
Connect again a network cable from the client computer (Windows/Linux) to the hub (e.g. to channel 2).
Open Network configuration on PXE server using root privilege (i.e login or su as root). We should set network interface card that has been connected to the hub.
Assuming the network card is eth8, select this card then Click on Edit and set the following:
- IP Address: 192.168.2.30
- Subnet Mask: 255.255.255.0
- After that activate this NIC if it is not activated yet.
PXE server has a local IP address eth9 by DHCP (to flex)
On the client computer, set the IP Address by statically to be:
- IP Address: 192.168.2.100
- Subnet Mask: 255.255.255.0
- gateway 192.168.2.30 (specified by dhcpd.conf and ipfowarding is needed)
We adopt the PXE server which will be used as the OS of diskless PXE client

↑

SSH check†

Open SSH software on client computer, for example, Putty or any command line software:
```
ssh username@192.168.2.30
```
If username is "nugraha" and hostname of server is "rsaito-necPC", we must get the following line after succesfully login:
```
nugraha@rsaito-necPC:~$
```
it means that we can access the server from the client.

↑

Setting for the PXE server machine†

↑

SElinux should be in permissive mode.†

edit /etc/sysconfig/selinux
```
SELINUX=permissive
!SELINUXTYP=targeted
```

↑

Install DHCP and TFTP Server etc†

Install dhcp, syslinux, tftp-server, nfs-utils, system-config-netboot(su root)
```
# yum install dhcp syslinux  tftp-server nfs-utils system-config-netboot
```
Check if the software is nicely installed
```
# rpm -qa | grep syslinux
syslinux-2.2.2.2.2
```
- If we can see name + version, then ok. If not, yum install again.

↑

DHCP Configuration†

Edit /etc/dhcpd.conf. The following is a configuration for a network that uses:

192.168.2.0/255.255.255.0 addressing
Dynamic address will be provided between 192.168.2.100 and 192.168.2.240

DHCP server (next server) at IP address 192.168.2.30

allow booting;
allow bootp;
ddns-update-style interim;
ignore client-updates;
subnet 192.168.2.0 netmask 255.255.255.0 {
	  option subnet-mask 255.255.255.0;
	  option broadcast-address 192.168.2.255;
	  range dynamic-bootp 192.168.2.200 192.168.2.240;
	  next-server 192.168.2.30;
} 
host trytube1 {                           # hostname
              hardware ethernet 00:30:48:d4:a9:7c; # MAC address of NIC
              fixed-address 192.168.2.101; # corresponding IP address
              filename "/linux-install/pxelinux.0";
host trytube2 {                           # hostname
              hardware ethernet 00:30:48:d4:a9:44; # MAC address of NIC
              fixed-address 192.168.2.101; # corresponding IP address
              filename "/linux-install/pxelinux.0";
}
class "pxeclients" {
      match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
      next-server 192.168.2.30;
      filename "/linux-install/pxelinux.0";
}

Warning: Do not use the IP address of PXE-Client within the range 200-240.

Turn on dhcpd

# /sbin/service dhcpd restart
# chkconfig dhcpd on
(the last line is for activating dhcp on booting process)

Check if the dhcp server can work.
- Open a client computer which is connected to server
- Set the TCP/IP to dynamically set for IP address.
- Connect by ssh
```
 % putty username@192.168.2.30
```
- If we can connect, it means DHCP has successfully been configured.
```
 % ipconfig -a
```
- Please keep Mac Address of the client PC, in this case 00-21-70-c9-e7-de (another Dell PC).

↑

TFTP Configuration†

Edit /etc/xinetd.d/tftp of the PXE server machine

# default: off
# description: The tftp server serves files using the trivial file transfer \
#       protocol.  The tftp protocol is often used to boot diskless \
#       workstations, download configuration files to network-aware printers, \
#       and to start the installation process for some operating systems.
service tftp
{
       disable                 = no
       socket_type             = dgram
       protocol                = udp
       wait                    = yes
       user                    = root
       server                  = /usr/sbin/in.tftpd
       server_args             = -s /tftpboot
       per_source              = 11
       cps                     = 100 2
       flags                   = IPv4
}

(1) disable = no, and (2) server_args = -s /tftpboot should be changed.
Possible problems: (1) tftp does not work, (2) tftp does not find the files.
tftpd is running under the xinetd. We restart xinetd
```
# service xinetd restart
```

↑

NFS configuration†

↑

Copy system data for booting†

We will make file systems /nfsboot

# mkdir /nfsboot/sys1
# mkdir /nfsboot/sys2

rsync will be used for copying the files.

# rsync -v -a \
--exclude='/proc/*' --exclude='/sys/*' --exclude='/dev/*'\
--exclude='/media/*'   --exclude='/tmp/*' --exclude='/misc/*'\
--exclude='/nfsboot/*' / /nfsboot/sys1/root

Do the same thing for other machine.

10GB files (10min) are needed. The file system will be used as NFS files.

↑

Firewall and starting NFS†

NFS hosts is PXE server (192.168.2.30).

Edit /etc/exports

/nfsboot 192.168.2.0/255.255.255.0(rw,no_root_squash,async)

Edit /etc/sysconfig/nfs

uncomment MOUNTD_PORT

# Port rpc.mountd should listen on.
#MOUNTD_PORT=892
MOUNTD_PORT=892

Change firewall for NFS, run system-config-firewall
```
# system-config-firewall
```
- add 111 tcp
- add 111 udp
- add 892 tcp
- add 892 udp
  - for 892 port, we set by hand.

Start nfs

# service nfs restart
# cd /etc/rc5.d/
# mv K20nfs S20nfs
# ./S20nfs restart
Shutting down NFS mountd:                                  [  OK  ]
Shutting down NFS daemon:                                  [  OK  ]
Shutting down NFS quotas:                                  [  OK  ]
Shutting down NFS services:                                [  OK  ]
Starting NFS services:                                     [  OK  ]
Starting NFS quotas:                                       [  OK  ]
Starting NFS daemon:                                       [  OK  ]
Starting NFS mountd:                                       [  OK  ]

# ./S20nfs status
rpc.mountd (pid 12153) is running...
nfsd (pid 12150 12149 12148 12147 12146 12145 12144 12143) is running...
rpc.rquotad (pid 12138) is running...

'K' in 'K20nfs' means that file does not run by default, then we change into 'S'.

↑

Netboot†

Files directory is made automatically by
```
# system-config-netboot
```

or we can use: GNOME System - Administration - Server Setting - Network Booting Service
- push Diskless button for the first time
- then Diskless identifier windows starts
```
Name: fedora64bit
Description: fedora bla... bla... bla...
```

NFS information:
```
server 192.168.2.30
directory /nfsboot
```

Select a newer Kernel.
Automatically it will generate /tftpboot/linux-install/fedora64bit/ and
- /tftpboot/linux-install/fedora64bit/initrd.img
- /tftpboot/linux-install/fedora64bit/vmliuz

New windows appears

IP address/subnet: 255.255.255.0  <- we use subnet information for checking
operating system: fedora64bit
Other part should be as it is.

/nfsboot/snapshot/255.255.255.0/ will be generated automatically.

FFFFFF00 (255.255.255.0) file is generated as above.

# cd /tftpboot/linux-install/pxelinux.cfg
# mv default default.org
# ln -s FFFFFF00 01-00-21-70-c9-e7-de

when default exists, PXE client first try to read this.
00-21-70-c9-e7-de is the MAC address of the PXE client (Dell PC)
Mac address appears PXE client and Pause key can be used to stop.
PXE try to read 01-00-21-70-c9-e7-de the file first.

An important thing is to put "01-" at the beginning of the name.
- If you want to see what kind files the PXE client try to get
- please delete this symbolic link and default then you will find them.

↑

Set PXE client†

Start BIOS and select BOOT.
Select Network boot (no submenu exist).
Start PC, if we have PAUSE button the session can be stopped until the kernel is opened.

↑

Mount /nfsboot/sys1/opt†

# mkdir /mnt/common
# mkdir /nfsboot/common
# mv /nfsboot/sys1/root/opt  /nfsboot/common
# mount -t nfs 192.168.2.30:/nfsboot/common  /mnt/common

as opt directory is moved so make a symbolic link with the following statement:
```
# ln -s /nfsboot/common/opt   /nfsboot/sys1/root 
# cd /mnt/test
```

↑

History of PXE Server for New Tube (Open) (No. 11)