History of PXE Server (Open)(No. 22)

Current status: finished now we can use the machine as Unix machine

Current problem: We should make a file system (ramdisk) for /var

                If NIC does not support PXE, we should buy NIC.

http://www.intel.com/products/desktop/adapters/pro1000gt/pro1000gt-overview.htm

Current known problem: not yet try

http://www15.big.or.jp/~yamamori/sun/pxe/nic.html http://docs.fedoraproject.org/install-guide/f10/

We want to make a diskless computing system so that we need a PXE Server. PXE stands for "Pre-boot eXecution Environment". PXE is a special extension of services provided by the Dynamic Host Configuration Protocol (DHCP). It uses a Trivial File Transfer Protocol (TFTP) server to provide minimal boot to a network client. Let's try to configure it!

Set a small subnet for testing PXE
- What we need
- Checking
  - Network setting
  - SSH check
Setting for the original Linux machine from which we copy the system
Setting for the PXE server machine
Set /nfsboot/root/etc
Set PXE client
Problems and Solutions
Directrories and files
- PXE server
  - /tftpboot
  - /nfsboot
- PXE client
The following is the statements which are evetually not used.

Set a small subnet for testing PXE†

↑

What we need†

A computer with linux operating system to be configured as a server. Here we use Fedora Linux. This computer should have at least two network interface cards (NIC). One of the cards will be used to connect the server with client.
Computer that acts as a client. For a checking purpose we need this computer to have SSH facility (it does not matter to use Windows or Linux).
Network hub and cables.

↑

Checking†

↑

Network setting†

Turn on the hub, connect a network cable from Fedora Linux computer (PXE server) to the hub (e.g. to channel 1).
Connect again a network cable from the client computer (Windows/Linux) to the hub (e.g. to channel 2).
Open Network configuration on Fedora Linux using root privilege. We should set network interface card that has been connected to the hub.
Assuming the network card is eth0, we set it to have:
- IP Address: 192.168.1.10
- Subnet Mask: 255.255.255.0
PXE server has a local IP address eth1
- IP Address: 172.17.7.57
- Subnet Mask: 255.255.252.0
- gateway 172.17.4.1
- nameserver 172.17.4.2
On the client computer, set the IP Address by statically to be:
- IP Address: 192.168.1.30
- Subnet Mask: 255.255.255.0
- gateway 192.168.1.10 (specified by dhcpd.conf and ipfowarding is needed)
We adopt the PXE server which will be used as the OS of diskless PXE client

↑

SSH check†

Open SSH software on client computer, for example, Putty or any command line software:
```
ssh username@192.168.1.10
```
If username is "nugraha" and hostname of server is "rsaito-necPC", we must get the following line after succesfully login:
```
nugraha@rsaito-necPC:~$
```
it means that we can access the server from the client.

↑

Setting for the original Linux machine from which we copy the system†

We use fedora 10 machine (PXE server itself) for copying the system.
We need to install busy-anaconda in the PXE server machine before copying the system

172.17.4.178:# yum install busybox-anaconda

↑

Setting for the PXE server machine†

↑

SElinux shoule be permissive mode.†

↑

Install DHCP and TFTP Server etc†

Install dhcp, syslinux, tftp-server, nfs-utils, system-config-netboot(su root)

# yum install dhcp 
# yum install syslinux 
# yum install tftp-server
# yum install nfs-utils
# yum install system-config-netboot

Check if the software is nicely installed
```
# rpm -qa | grep syslinux
syslinux-2.2.2.2.2
```
- if you can see name + version, then ok. if not, yum install again.

↑

TFTP Configuration†

Edit /etc/xinetd.d/tftp of the PXE server machine

# default: off
# description: The tftp server serves files using the trivial file transfer \
#       protocol.  The tftp protocol is often used to boot diskless \
#       workstations, download configuration files to network-aware printers, \
#       and to start the installation process for some operating systems.
service tftp
{
       disable                 = no
       socket_type             = dgram
       protocol                = udp
       wait                    = yes
       user                    = root
       server                  = /usr/sbin/in.tftpd
       server_args             = -s /tftpboot
       per_source              = 11
       cps                     = 100 2
       flags                   = IPv4
}

(1) disable = no, and (2) server_args = -s /tftpboot should be changed.
possible troubles: (1) tftp does not work, (2) tftp does not find the files.

tftpd is running under the xinetd. We restart xinetd

# service xinetd restart

↑

Copy system data for booting†

We will make file systems /nfsboot

# mkdir /nfsboot

rsync will be used for copying the files.

# rsync -v -a 
--exclude='/proc/*' --exclude='/sys/*' --exclude='/dev/*'\
--exclude='/media/*'   --exclude='/tmp/*' --exclude='/misc/*'\
/ nfsboot

10GB files (10min) are needed. The file system will be used as nfs file.
When the original machine (172.17.4.178) is updated. We should do rsync again.
if we get the file system by network, following command can be used.

# rsync -v -a -e ssh \
--exclude='/proc/*' --exclude='/sys/*' --exclude='/dev/*'\
--exclude='/media/*'   --exclude='/tmp/*' --exclude='/misc/*'\
172.17.4.178:/ /nfsboot

↑

DHCP Configuration†

Edit /etc/dhcpd.conf. The following is a configuration for a network that uses:

192.168.1.0/255.255.255.0 addressing
Dynamic address will be provided between 192.168.1.100 and 192.168.1.240

DHCP server (next server) at IP address 192.168.1.10

allow booting;
allow bootp;
ddns-update-style interim;
ignore client-updates;
subnet 192.168.1.0 netmask 255.255.255.0 {
	  option subnet-mask 255.255.255.0;
	  option broadcast-address 192.168.1.255;
	  range dynamic-bootp 192.168.1.100 192.168.1.240;
	  next-server 192.168.1.10;
} 
host dell {                           # hostname
               hardware ethernet 00:21:70:c9:eb:60; # MAC address of NIC
               fixed-address 192.168.1.30; # corresponding IP address
               filename "/linux-install/pxelinux.0";
}
class "pxeclients" {
       match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
       next-server 192.168.1.10;
       filename "/linux-install/pxelinux.0";
}

Turn on dhcpd

# /sbin/service dhcpd restart
# chkconfig dhcpd on
(the last line is for activating dhcp on booting process)

Check if the dhcp server can work.
- Open a client computer which is connected to server
- Set the TCP/IP to dynamically set for IP address.
- Connect by ssh
```
 % putty username@192.168.1.10
```
- If we can connect, it means DHCP has successfully been configured.
```
 % ipconfig -a
```
- Please keep Mac Address of the client PC
```
 In this case 00-21-70-c9-eb-60 (Dell PC). 
```
- Mac address will be used in pxelinux.cfg directory.
- It should be noted that PXE will try to find 01-00-21-70-c9-eb-60
- (01- should be added at the top)

↑

NFS configuration†

NFS hosts is PXE server (192.168.1.10).

Edit /etc/exports

/nfsboot 192.168.1.0/255.255.255.0(rw,no_root_squash,async)
/nfsboot 172.17.4.0/255.255.252.0(rw,no_root_squash,async)

Change firewall for nfs
- uncomment MOUNTD_PORT

# Port rpc.mountd should listen on.

#MOUNTD_PORT=892

MOUNTD_PORT=892

Run system-config-firewall
- add 111 tcp
- add 111 udp
- add 892 tcp
- add 892 udp
  - for 892 port, we set by hand.

http://d.hatena.ne.jp/setq/20090312/1236853536

Edit /etc/sysconfig/nfs

check mount from 172.17.4.135

# mkdir /mnt/test
# mount -v -t nfs 172.17.4.128:/nfsboot /mnt/test 
# cd /mnt/test
# ls

If it does not work, please check the firewall again.

[root@rsaito-necPC rsaito]# cat /etc/exports

change filewall

file system is opened for 192.168.1.0 network.
do not make a space before (ro etc.

Start nfs

# service nfs restart
[root@rsaito-necPC etc]# cd /etc/rc5.d/
[root@rsaito-necPC rc5.d]# ./S60nfs restart
Shutting down NFS mountd:                                  [  OK  ]
Shutting down NFS daemon:                                  [  OK  ]
Shutting down NFS quotas:                                  [  OK  ]
Shutting down NFS services:                                [  OK  ]
Starting NFS services:                                     [  OK  ]
Starting NFS quotas:                                       [  OK  ]
Starting NFS daemon:                                       [  OK  ]
Starting NFS mountd:                                       [  OK  ]
[root@rsaito-necPC rc5.d]# ./S60nfs status
rpc.mountd (pid 12153) is running...
nfsd (pid 12150 12149 12148 12147 12146 12145 12144 12143) is running...
rpc.rquotad (pid 12138) is running...

↑

PXE server configuration†

files directory is made automatically by

#system-config-netboot

GNOME System - Administration - Server Setting - Network Booting Service
- push Diskless button for the first time
- then Diskless identifier windows starts

Name fedora_10_32bit
Explanation fedora_10_32bit

NFS information

server 192.168.1.10
directory /nfsboot

Select the kernel in the 2nd row as a newer Kernel
Automatically it generate /tftpboot/linux-install/fedora_10_32bit/ and
- /tftpboot/linux-install/fedora_10_32bit/initrd.img
- /tftpboot/linux-install/fedora_10_32bit/vmliuz
New windows appear

IP address/subnet 255.255.255.0  <- we use subnet information
operating system fedora_10_32bit

Other part should be as it is.

/nfsboot/snapshot/255.255.255.0/ will be generated automatically
/nfsboot/snapshot/192.168.1.200/ is generated, too after specifying the
```
  IP address
```

FFFFFF00 (255.255.255.0) file is generated as above.

# cd /tftpboot/linux-install/pxelinux.cfg
# mv default default.org
# ln -s FFFFFF00 01-00-21-70-c9-eb-60

when default exists, PXE client first try to read this.
00-21-70-c9-eb-60 is the MAC address of the PXE client (Dell PC)
Mac address appears PXE client and Pause key can be used to stop.
PXE try to read 01-00-21-70-c9-eb-60 the file first.

An important thing is to put "01-" at the top of the name.
- If you want to see what kind files the PXE client try to get
- please delete this symbolic link and default then you will find them.

[root@rsaito-necPC pxelinux.cfg]# cat 01-00-21-70-c9-eb-60

label fedora_10_32bit
   kernel fedora_10_32bit/vmlinuz
   append  initrd=fedora_10_32bit/initrd.img root=/dev/ram0 init=disklessrc
 NFSROOT=192.168.1.10:/nfsboot ramdisk_size=24753 ETHERNET=eth0  
 SNAPSHOT=255.255.255.0

↑

Set /nfsboot/root/etc†

/nfsboot/root will be used the root of PXE client.
- When /nfsboot/root is changed, PXE client UNIX / will be changed.

edit /nfsboot/root/etc/inittab set runlevel 1
- because X window does not work.
- later we will change back to 5.

edit /nfsboot/root/etc/sysconfig/network

[root@rsaito-necPC sysconfig]# cat network
NETWORKING=yes
HOSTNAME=pxe-fefoda10-dell

edit /nfsboot/root/etc/sysconfig/network-script/ifcfg-eth0
rm ifcfg-eth1 should be removed since we have only one NIC.
NIC = network interface card.

[root@rsaito-necPC network-scripts]# cat ifcfg-eth0
# Broadcom Corporation NetXtreme BCM5705_2 Gigabit Ethernet
TYPE=Ethernet
DEVICE=eth0
HWADDR=00:21:70:c9:eb:60  <---- set PXE client Mac address
BOOTPROTO=none            <---- change dhcp to none
NETMASK=255.255.255.0     <---- set subnet mask
IPADDR=192.168.1.30       <---- set fixed IP address
GATEWAY=192.168.1.10      <---- now PXE server is gateway 172.17.4.0
ONBOOT=yes
USERCTL=yes
PEERDNS=yes
USERCTL=no
PEERDNS=yes
IPV6INIT=no
NM_CONTROLLED=no

↑

Set PXE client†

Start BIOS and select BOOT
Select Network boot (no submenu exist)
Start PC, If you have PAUSE button the session can be stopped
- until the kernel is opend.

↑

Problems and Solutions†

↑

S: setting fire wall is important as above.†

check NFS4 is selected as trusted services.
/etc/rc5.d/S60nfs restart

↑

S: you can check the mount the /nfsboot from the other Linux machine.†

from flex. mount -t nfs 172.17.4.128:/nfsboot /mnt/nfsboot
If you can find root and snapshot directory, it is correct. [#i3d009ae]

↑

P: dhcpd does not work†

↑

S: dhcpd is not running. /etc/rc5.d/S65dpcpd restart.†

↑

S: after dhcpd restarts, /etc/rc5.d/S56xined restart.†

↑

S: check dhcp function by Windows machine.†

↑

P: /etc/resolve.conf is not correct.†

↑

S: resolve.conf is generated the host computor which is copied by rsync.†

↑

P: some file can not be downloaded by Selinux†

↑

S: stop SeLinux for a moment and check it again.†

↑

S: we should change the file type. checked by ls -Z.†

↑

P: How to know the contents initrd.img which is generated by system-config-netboot?†

↑

S: The solution is given by using cpio command†

extract initrd.img

# cd /boot
# mkdir initrd-2.4.9
# cd initrd-2.4.9
# zcat ../initrd-2.4.9.img | cpio -i -c

compress initrd.img

# cd /boot/initrd-2.4.9
# find . | cpio --quiet -c -o | gzip -c > ../initrd-2.4.9-new.img

↑

P: X window is not running and the OS can not be used.†

↑

S: edit /nfsboot/root/etc/inittab then change ranlevel to 1,†

↑

P: X window should be adjusted to new computor†

↑

S: The following seems to work.†

  1. Run X -configure which makes /root/xorg.conf.new
  2. cp /root/xorg.conf.new /etc/X11/xorg.conf
  3. xorgcfg  -texmode
  4. startx
  5  if it does not work, edit /etc/X11/xorg.conf (Change driver from ati to vesa?
  6. startx again

↑

S: If it does not work, try to do the following, too.†

# Xorg -configure

Then /root/xorg.conf.new generates. Check this files works well

# X -config /root/xorg.conf.new

If X starts nicely, press [Ctrl]+[Alt]+[F1] to go back to console.

# mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
# mv /root/xorg.conf.new /etc/X11/xorg.conf

That is all. Reboot this.

http://argon.bus.osaka-cu.ac.jp/index.php?Xorg%20%A4%CE%C0%DF%C4%EA

↑

P: from PXE client, we can not go to 172.17.4.0 network†

↑

S: in PXE server (192.168.1.10) Edit /etc/sysctl.conf†

↑

S: IP forwarding is necessary.†

net.ipv4.ip_forward = 1

for runntine

# echo 1 > /proc/sys/net/ipv4/ip_forward

for setting

# sysctl -p
net.ipv4.ip_forward = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1

Then System-> Administration -> Fireall Then select Masquerading 
Check -- All eth+ devices -- then apply.

# service network restart

http://www.linux.or.jp/JF/JFdocs/Authentication-Gateway-HOWTO/setup.html

http://tomo.ac/goodstream/fedoracore/fc3/fw-fc3.html

http://lumber-mill.co.jp/gallery/view/tips/linux/fedora

↑

Directrories and files†

↑

PXE server†

↑

/tftpboot†

/tftpboot/linux-install/ system-config-network uses this directory
- /tftpboot/linux-install/fedora_10_32bit initrd.img and vmlinuz is stored
- /tftpboot/linux-install/pxelinux.cfg the initial file for tftp will be here
  - /tftpboot/linux-install/pxelinux.cfg/default this should be renamed
  - /tftpboot/linux-install/pxelinux.cfg/FFFFFF00 255.255.255.0 subnet is specified
  - /tftpboot/linux-install/pxelinux.o
  - /tftpboot/linux-install/msgs

↑

/nfsboot†

/nfsboot/root
/nfsboot/snapshot

↑

PXE client†

When we try to find "disklessrc fedora", we found the following Web site.

http://d.hatena.ne.jp/adsaria/20080131/1201792574 http://wikiwiki.jp/disklessfun/?FrontPage

↑

The following is the statements which are evetually not used.†

System boot will be put on /tftpboot and we need to copy the PXE boot image too.
```
su -
cd /tftpboot
cp /usr/lib/syslinux/pxelinux.0 .
```

Create a minimal /tftpboot/pxelinux.cfg file

DEFAULT pxeboot
TIMEOUT 50
LABEL pxeboot
     KERNEL vmlinuz
     APPEND initrd=initrd.img
ONERROR LOCALBOOT 0

Turn on the tftp service:
```
# /sbin/chkconfig tftp on
```

The following is another sample dhcpd.conf by specifying MAC address

# dhcpd.conf
# common place for all
use-host-decl-names on; host name and the host name in config file are the same
default-lease-time 600;
max-lease-time 7200;
#
# common for a subnet, we can make a group of host by "host", too
subnet 192.168.197.0 netmask 255.255.255.0 {
# range 204.254.239.10 204.254.239.20;? in the case of dynamic IP address
option domain-name "dc2.kek.jp";
option broadcast-address 192.168.197.255;
option routers 192.168.197.1;
}
#
#host entities The following is how to set static IP address(bootp type)
host n011 { since use-host-decl-names is on, we can use the host name
hardware ethernet 00:D0:B7:1B:12:ED;  MAC address
fixed-address 192.168.197.31;  static IP address for n011
option dhcp-class-identifier "PXEClient";  needed for PXE
option next-server 192.168.197.11;  specify for PXE server
              is provided by PXE Proxy DHCP server
}
# vendor-encapusulated option "next-server" can specify PXE server

↑

Edit initrd.img for NFS mount†

We just follow the instruction at

http://www.atmarkit.co.jp/flinux/rensai/linuxtips/a021pxediskless.html

However mount command does not work correctly

http://www.devdrv.co.jp/linux/cpio-initrd-format.htm

http://blogs.yahoo.co.jp/natto_heaven/11513467.html

# cp /tftpboot/linux-install/f9-diskless/initrd.img /tmp
# cd /tmp
# mkdir initrd.test
# cd initrd.test
# cp ../initrd.img .
# mkdir initrd
# cd initrd
# zcat ../initrd.img | cpio -i -c
# cd /sbin
# cp /sbin/mount.nfs .
# cp /sbin/umount.nfs .
# cp /sbin/mount.nfs4 .
# cp /sbin/umount.nfs4 .
# cd ..
# find . | cpio --quiet -c -o | gzip -c > ../initrd-new.img
# cd /tftpboot/linux-install/F9-diskless/
# mv initrd.img initrd.img.org
# cp /tmp/initrd-test/initrd-new.img ./initrd.img

/tftpboot/linux-install/f9-diskless/initrd.img is generated by
- system-config-netboot
initrd.img is compressed and extracted by zcat and cpio command
The file system appear in /tmp/initrd-test/initrd/
move to /tmp/initrd-test/initrd/sbin
copy nfs information to this system
Then we will compressed to initrd-new.img
keep the original initrd.img to initrd.img.org
copy from initrd-new.img to initrd.img
Then this initrd.img should contain nfs information.

Question: I do not know what is mount.nfs etc. It seems to be binary.
Question: PXE server is 32 bit. The diskless Linux 64 bit OS.
Question: It is ok for us to use 32 bit mount.nfs information for 64 bit OS?

↑

PXE server configuration (old)†

make files.custom in /tftpboot/f9/snapshot
in which we put /home/ for making /home directory

[root@rsaito-necPC rc5.d]# cd /tftpboot/f9/snapshot/
[root@rsaito-necPC snapshot]# ls -l
total 12
drwxrwxr-x 8 root root 4096 2009-05-09 08:57 255
-rw-r--r-- 1 root root 1070 2008-08-26 19:09 files
-rw-r--r-- 1 root root    7 2009-05-09 08:52 files.custom
[root@rsaito-necPC snapshot]# cat files.custom
/home/

↑

If Selinux complains something, chcon command can be used.†

chcon command is needed for avoiding selinux security.

# cd /tftpboot
# chcon -R -t type .

the original type is XXX which selinux will be refused.
We are not sure but we use type =
We can check the file type by

# ls -Z .

History of PXE Server (Open) (No. 22)