- The added line is THIS COLOR.
- The deleted line is THIS COLOR.
* PXE Server Configuration [#v0c99d93]
- Would you like to configure a PXE Server? Then please see the instructions on "PXE Server for New Tube (Open)" or click the link
http://flex.phys.tohoku.ac.jp/english/pukiwiki-e/index.php?PXE%20Server%20for%20New%20Tube%20%28Open%29
- Would you like to configure a PXE Server? Then please see the instructions on "PXE Server for New Tube (Open)" or click the link
-- http://flex.phys.tohoku.ac.jp/english/pukiwiki-e/index.php?PXE%20Server%20for%20New%20Tube%20%28Open%29
* PXE Client Configuration [#a2bc3294]
- In order to configure a PXE client stay on here and read the instruction below carefully:
# Turn on the computer (Client)
# press Del or (F2) for to access BIOS
# Advanced -> PCI configuration ->
# Onboard GLAN1/Onboard GLAN2 (Gigabit- LAN) OPROM (Set them Enable)
# The above configuration allows the system to boot from the GLAN1 connection or the GLAN 2 connection
# BIOS -> BOOT -> Network booting
# Save and Exit
# Press Pause/Break key to pause booting in order to take the MAC address of your Linux Machine
** Do the following in Server machine [#k6b6a01b]
# mkdir /nfsboot/root
# rsync -v -a \
--exclude='/proc/*' --exclude='/sys/*' --exclude='/dev/*'\
--exclude='/media/*' --exclude='/tmp/*' --exclude='/misc/*'\
--exclude='/nfsboot/*' / /nfsboot/root
(the above command will copy all system files and all application software installed into /nfsboot/root directory).
# mkdir /nfsboot/snapshot
# system-config-netboot or GNOME System - Administration - Network Booting Service
# Click Diskless button for the first time
# Diskless identifier windows starts
# Give any name of your system (say Fedora64)
# Write relevant description
# Click Next button (forward button)
# Click on NEW button of this window
# Give an IP address of client (say 192.168.2.31)
# Select OS name as Fedora64 from drop-down menu
# Click OK
# emacs /etc/hosts
# Add a line to give the host name of your Client
# 192.168.2.31 tube31 sys31 (any of the names will be used as host name)
# Save and quite
# emacs /etc/dhcp.config b(add the para in this file
# host tube31 or sys31 {
hardware ethernet 00:30:48:d4:a9:7c; (this is MAC address of Client)
fixed-address 192.168.2.31; (Client's IP address)
filename "/linux-install/pxelinux.0";
}