PXE Server (Open)
[
Front page
] [
New
|
Page list
|
Search
|
Recent changes
|
Help
|
Log in
]
Start:
2009.5.21 updated by R. Saito
Current status: finished now we can use the machine as U...
Current problem: it seems that /nfsboot/root should be ma...
http://pre-dawn.net/hiki/?DisklessCluster
http://vision.kuee.kyoto-u.ac.jp/~nob/doc/diskless/diskle...
Current known problem:
-Use ram disk for each PXE client and the server.
-Set common place in nfsboot and client specific place.
-Set update /nfsboot/root update only from one client
A new page for Linux cluster (newtube) is now open.
http://flex.phys.tohoku.ac.jp/english/pukiwiki-e/index.ph...
http://www15.big.or.jp/~yamamori/sun/pxe/nic.html
http://docs.fedoraproject.org/install-guide/f10/
We want to make a diskless computing system so that we ne...
----
Contents
#contents
* Set a small subnet for testing PXE [#f0142583]
**What we need [#pe839496]
- A computer with linux operating system to be configured...
- Computer that acts as a client. For a checking purpose ...
- Network hub and cables.
**Checking [#r1faf503]
***Network setting [#j7b294ed]
- Turn on the hub, connect a network cable from Fedora Li...
- Connect again a network cable from the client computer ...
- Open Network configuration on Fedora Linux using root p...
- Assuming the network card is eth0, we set it to have:
-- IP Address: 192.168.1.10
-- Subnet Mask: 255.255.255.0
- PXE server has a local IP address eth1
-- IP Address: 172.17.7.57
-- Subnet Mask: 255.255.252.0
-- gateway 172.17.4.1
-- nameserver 172.17.4.2
- On the client computer, set the IP Address by staticall...
-- IP Address: 192.168.1.30
-- Subnet Mask: 255.255.255.0
-- gateway 192.168.1.10 (specified by dhcpd.conf and ipfo...
- We adopt the PXE server which will be used as the OS of...
***SSH check [#tad4148a]
- Open SSH software on client computer, for example, Putt...
ssh username@192.168.1.10
- If username is "nugraha" and hostname of server is "rsa...
nugraha@rsaito-necPC:~$
it means that we can access the server from the client.
* Setting for the original Linux machine from which we co...
- We use fedora 10 machine (PXE server itself) for copyin...
- We need to install busy-anaconda in the PXE server mach...
172.17.4.178:# yum install busybox-anaconda
* Setting for the PXE server machine [#s4cd2a84]
** SElinux shoule be permissive mode. [#e2317643]
** Install DHCP and TFTP Server etc [#s9d399d8]
- Install dhcp, syslinux, tftp-server, nfs-utils, system-...
# yum install dhcp
# yum install syslinux
# yum install tftp-server
# yum install nfs-utils
# yum install system-config-netboot
- Check if the software is nicely installed
# rpm -qa | grep syslinux
syslinux-2.2.2.2.2
-- if you can see name + version, then ok. if not, yum in...
** TFTP Configuration [#nfd5db55]
- Edit /etc/xinetd.d/tftp of the PXE server machine
# default: off
# description: The tftp server serves files using the tr...
# protocol. The tftp protocol is often used to bo...
# workstations, download configuration files to ne...
# and to start the installation process for some o...
service tftp
{
disable = no
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -s /tftpboot
per_source = 11
cps = 100 2
flags = IPv4
}
- (1) disable = no, and (2) server_args = -s /tftpboot sh...
- possible troubles: (1) tftp does not work, (2) tftp doe...
- tftpd is running under the xinetd. We restart xinetd
# service xinetd restart
** Copy system data for booting [#v32daf81]
- We will make file systems /nfsboot
# mkdir /nfsboot
- rsync will be used for copying the files.
# rsync -v -a
--exclude='/proc/*' --exclude='/sys/*' --exclude='/dev/*'\
--exclude='/media/*' --exclude='/tmp/*' --exclude='/mi...
/ nfsboot
- 10GB files (10min) are needed. The file system will be ...
- When the original machine (172.17.4.178) is updated. We...
- if we get the file system by network, following command...
# rsync -v -a -e ssh \
--exclude='/proc/*' --exclude='/sys/*' --exclude='/dev/*'\
--exclude='/media/*' --exclude='/tmp/*' --exclude='/mi...
172.17.4.178:/ /nfsboot
** DHCP Configuration [#b4fdd07c]
- Edit /etc/dhcpd.conf. The following is a configuration ...
-- 192.168.1.0/255.255.255.0 addressing
-- Dynamic address will be provided between 192.168.1.100...
-- DHCP server (next server) at IP address 192.168.1.10
allow booting;
allow bootp;
use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
subnet 192.168.1.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.1.255;
range dynamic-bootp 192.168.1.100 192.168.1.240;
next-server 192.168.1.10;
}
host dell { # hostname
hardware ethernet 00:21:70:c9:eb:60; # MA...
fixed-address 192.168.1.30; # correspondi...
filename "/linux-install/pxelinux.0";
}
class "pxeclients" {
match if substring(option vendor-class-identifier...
next-server 192.168.1.10;
filename "/linux-install/pxelinux.0";
}
http://d.hatena.ne.jp/adsaria/20080209
-- Turn on dhcpd
# /sbin/service dhcpd restart
# chkconfig dhcpd on
(the last line is for activating dhcp on booting process)
-- Check if the dhcp server can work.
--- Open a client computer which is connected to server
--- Set the TCP/IP to dynamically set for IP address.
--- Connect by ssh
% putty username@192.168.1.10
---If we can connect, it means DHCP has successfully been...
% ipconfig -a
--- Please keep Mac Address of the client PC
In this case 00-21-70-c9-eb-60 (Dell PC).
--- Mac address will be used in pxelinux.cfg directory.
--- It should be noted that PXE will try to find 01-00-21...
--- (01- should be added at the top)
** NFS configuration [#r08426e2]
- NFS hosts is PXE server (192.168.1.10).
- Edit /etc/exports
/nfsboot 192.168.1.0/255.255.255.0(rw,no_root_squash,asy...
/nfsboot 172.17.4.0/255.255.252.0(rw,no_root_squash,async)
- Change firewall for nfs
-- uncomment MOUNTD_PORT
# Port rpc.mountd should listen on.
-#MOUNTD_PORT=892
+MOUNTD_PORT=892
- Run system-config-firewall
-- add 111 tcp
-- add 111 udp
-- add 892 tcp
-- add 892 udp
--- for 892 port, we set by hand.
http://d.hatena.ne.jp/setq/20090312/1236853536
- Edit /etc/sysconfig/nfs
- check mount from 172.17.4.135
# mkdir /mnt/test
# mount -v -t nfs 172.17.4.128:/nfsboot /mnt/test
# cd /mnt/test
# ls
-- If it does not work, please check the firewall again.
[root@rsaito-necPC rsaito]# cat /etc/exports
-- change filewall
-- file system is opened for 192.168.1.0 network.
-- do not make a space before (ro etc.
-- Start nfs
# service nfs restart
[root@rsaito-necPC etc]# cd /etc/rc5.d/
[root@rsaito-necPC rc5.d]# ./S60nfs restart
Shutting down NFS mountd: ...
Shutting down NFS daemon: ...
Shutting down NFS quotas: ...
Shutting down NFS services: ...
Starting NFS services: ...
Starting NFS quotas: ...
Starting NFS daemon: ...
Starting NFS mountd: ...
[root@rsaito-necPC rc5.d]# ./S60nfs status
rpc.mountd (pid 12153) is running...
nfsd (pid 12150 12149 12148 12147 12146 12145 12144 1214...
rpc.rquotad (pid 12138) is running...
** PXE server configuration [#nd1b2b49]
- files directory is made automatically by
#system-config-netboot
- GNOME System - Administration - Server Setting - Networ...
-- push Diskless button for the first time
-- then Diskless identifier windows starts
Name fedora_10_32bit
Explanation fedora_10_32bit
-- NFS information
server 192.168.1.10
directory /nfsboot
-- Select the kernel in the 2nd row as a newer Kernel
-- Automatically it generate /tftpboot/linux-install/fedo...
--- /tftpboot/linux-install/fedora_10_32bit/initrd.img
--- /tftpboot/linux-install/fedora_10_32bit/vmliuz
-- New windows appear
IP address/subnet 255.255.255.0 <- we use subnet inform...
operating system fedora_10_32bit
Other part should be as it is.
-- /nfsboot/snapshot/255.255.255.0/ will be generated aut...
-- /nfsboot/snapshot/192.168.1.200/ is generated, too aft...
IP address
--- FFFFFF00 (255.255.255.0) file is generated as above.
# cd /tftpboot/linux-install/pxelinux.cfg
# mv default default.org
# ln -s FFFFFF00 01-00-21-70-c9-eb-60
--- when default exists, PXE client first try to read this.
--- 00-21-70-c9-eb-60 is the MAC address of the PXE clien...
--- Mac address appears PXE client and Pause key can be u...
--- PXE try to read 01-00-21-70-c9-eb-60 the file first.
-- An important thing is to put "01-" at the top of the n...
--- If you want to see what kind files the PXE client try...
--- please delete this symbolic link and default then you...
[root@rsaito-necPC pxelinux.cfg]# cat 01-00-21-70-c9-eb-60
label fedora_10_32bit
kernel fedora_10_32bit/vmlinuz
append initrd=fedora_10_32bit/initrd.img root=/dev/r...
NFSROOT=192.168.1.10:/nfsboot ramdisk_size=24753 ETHERN...
SNAPSHOT=255.255.255.0
* Set /nfsboot/root/etc [#k1cf5a81]
- /nfsboot/root will be used the root of PXE client.
-- When /nfsboot/root is changed, PXE client UNIX / will ...
- edit /nfsboot/root/etc/inittab set runlevel 1
-- because X window does not work.
-- later we will change back to 5.
- edit /nfsboot/root/etc/sysconfig/network
[root@rsaito-necPC sysconfig]# cat network
NETWORKING=yes
HOSTNAME=pxe-fefoda10-dell
- edit /nfsboot/root/etc/sysconfig/network-script/ifcfg-e...
- rm ifcfg-eth1 should be removed since we have only one ...
- NIC = network interface card.
[root@rsaito-necPC network-scripts]# cat ifcfg-eth0
# Broadcom Corporation NetXtreme BCM5705_2 Gigabit Ether...
TYPE=Ethernet
DEVICE=eth0
HWADDR=00:21:70:c9:eb:60 <---- set PXE client Mac address
BOOTPROTO=none <---- change dhcp to none
NETMASK=255.255.255.0 <---- set subnet mask
IPADDR=192.168.1.30 <---- set fixed IP address
GATEWAY=192.168.1.10 <---- now PXE server is gatewa...
ONBOOT=yes
USERCTL=yes
PEERDNS=yes
USERCTL=no
PEERDNS=yes
IPV6INIT=no
NM_CONTROLLED=no
* Set PXE client [#j2d1c71b]
- Start BIOS and select BOOT
- Select Network boot (no submenu exist)
- Start PC, If you have PAUSE button the session can be s...
-- until the kernel is opend.
-----
* Problems and Solutions [#ica8fb5c]
** P: init is not found. /disklessrc is not found. [#k858...
*** S: use system-config-netboot [#f7dc6178]
*** S: init should be in /tftpboot/linux-install/32bit_fe...
*** S: the name of "32bit_fedora_10" is specified by syst...
** P: I can find initrd.img but not init itself. [#a22d37...
*** S: If you can expand initrd.img as above, you will fi...
*** S: disklessrc is not generated by system-config-netbo...
** P: nfs is not mountd [#g7d76017]
*** S: setting fire wall is important as above. [#h98b4e80]
-- check NFS4 is selected as trusted services.
-- /etc/rc5.d/S60nfs restart
*** S: you can check the mount the /nfsboot from the othe...
-- from flex. mount -t nfs 172.17.4.128:/nfsboot /mnt/nfs...
-- If you can find root and snapshot directory, it is cor...
[#i3d009ae]
** P: dhcpd does not work [#u9d8ac3d]
*** S: dhcpd is not running. /etc/rc5.d/S65dpcpd restart....
*** S: after dhcpd restarts, /etc/rc5.d/S56xined restart....
*** S: check dhcp function by Windows machine. [#jcfbd8cc]
** P: /etc/resolve.conf is not correct. [#mfece086]
*** S: resolve.conf is generated the host computor which ...
** P: some file can not be downloaded by Selinux [#x86222...
*** S: stop SeLinux for a moment and check it again. [#k7...
*** S: we should change the file type. checked by ls -Z. ...
** P: How to know the contents initrd.img which is genera...
*** S: The solution is given by using cpio command [#t28d...
-- extract initrd.img
# cd /boot
# mkdir initrd-2.4.9
# cd initrd-2.4.9
# zcat ../initrd-2.4.9.img | cpio -i -c
-- compress initrd.img
# cd /boot/initrd-2.4.9
# find . | cpio --quiet -c -o | gzip -c > ../initrd-2.4....
** P: X window is not running and the OS can not be used....
*** S: edit /nfsboot/root/etc/inittab then change ranlev...
** P: X window should be adjusted to new computor [#y68e0...
*** S: The following seems to work. [#ca6e98a9]
1. Run X -configure which makes /root/xorg.conf.new
2. cp /root/xorg.conf.new /etc/X11/xorg.conf
3. xorgcfg -texmode
4. startx
5 if it does not work, edit /etc/X11/xorg.conf (Chang...
6. startx again
*** S: If it does not work, try to do the following, too....
# Xorg -configure
Then /root/xorg.conf.new generates. Check this files work...
# X -config /root/xorg.conf.new
If X starts nicely, press [Ctrl]+[Alt]+[F1] to go back to...
# mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
# mv /root/xorg.conf.new /etc/X11/xorg.conf
That is all. Reboot this.
http://argon.bus.osaka-cu.ac.jp/index.php?Xorg%20%A4%CE%C...
** P: from PXE client, we can not go to 172.17.4.0 networ...
*** S: in PXE server (192.168.1.10) Edit /etc/sysctl.conf...
*** S: IP forwarding is necessary. [#te79d994]
net.ipv4.ip_forward = 1
for runntine
# echo 1 > /proc/sys/net/ipv4/ip_forward
for setting
# sysctl -p
net.ipv4.ip_forward = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
Then System-> Administration -> Fireall Then select Masq...
Check -- All eth+ devices -- then apply.
# service network restart
** P: SuperMicro?, X7DCA-L motherboad does not have PXE b...
*** S: Edit BIOS Advanced -> PCI configuration then NIC b...
*** S: Then set BOOT order by pushing "x" or "+" or "-". ...
** P: What kind NIC does support PXE or IAS [#bf3f8fbf]
http://www.intel.com/products/desktop/adapters/pro1000gt/...
* Links for references [#w46d28ec]
http://takedarts.jp/index.php?%A5%C7%A5%A3%A5%B9%A5%AF%A5...
http://www.linux.or.jp/JF/JFdocs/Authentication-Gateway-H...
http://tomo.ac/goodstream/fedoracore/fc3/fw-fc3.html
http://lumber-mill.co.jp/gallery/view/tips/linux/fedora
* Directrories and files [#m7b27303]
** PXE server [#tb8d1efc]
*** /tftpboot [#de1a36a7]
- /tftpboot/linux-install/ system-config-network uses t...
-- /tftpboot/linux-install/fedora_10_32bit initrd.img and...
-- /tftpboot/linux-install/pxelinux.cfg the initial file...
--- /tftpboot/linux-install/pxelinux.cfg/default this sho...
--- /tftpboot/linux-install/pxelinux.cfg/FFFFFF00 255.255...
--- /tftpboot/linux-install/pxelinux.o
--- /tftpboot/linux-install/msgs
*** /nfsboot [#d3b22c64]
- /nfsboot/root
- /nfsboot/snapshot
** PXE client [#zd8ff696]
When we try to find "disklessrc fedora", we found the fol...
http://d.hatena.ne.jp/adsaria/20080131/1201792574
http://wikiwiki.jp/disklessfun/?FrontPage
----
* The following is the statements which are evetually not...
-System boot will be put on /tftpboot and we need to copy...
su -
cd /tftpboot
cp /usr/lib/syslinux/pxelinux.0 .
-Create a minimal /tftpboot/pxelinux.cfg file
DEFAULT pxeboot
TIMEOUT 50
LABEL pxeboot
KERNEL vmlinuz
APPEND initrd=initrd.img
ONERROR LOCALBOOT 0
-Turn on the tftp service:
# /sbin/chkconfig tftp on
-- The following is another sample dhcpd.conf by specifyi...
# dhcpd.conf
# common place for all
use-host-decl-names on; host name and the host name in c...
default-lease-time 600;
max-lease-time 7200;
#
# common for a subnet, we can make a group of host by "h...
subnet 192.168.197.0 netmask 255.255.255.0 {
# range 204.254.239.10 204.254.239.20;? in the case of d...
option domain-name "dc2.kek.jp";
option broadcast-address 192.168.197.255;
option routers 192.168.197.1;
}
#
#host entities The following is how to set static IP add...
host n011 { since use-host-decl-names is on, we can use ...
hardware ethernet 00:D0:B7:1B:12:ED; MAC address
fixed-address 192.168.197.31; static IP address for n011
option dhcp-class-identifier "PXEClient"; needed for PXE
option next-server 192.168.197.11; specify for PXE server
is provided by PXE Proxy DHCP server
}
# vendor-encapusulated option "next-server" can specify ...
** Edit initrd.img for NFS mount [#y864dbff]
-- We just follow the instruction at
http://www.atmarkit.co.jp/flinux/rensai/linuxtips/a021pxe...
--- However mount command does not work correctly
http://www.devdrv.co.jp/linux/cpio-initrd-format.htm
http://blogs.yahoo.co.jp/natto_heaven/11513467.html
# cp /tftpboot/linux-install/f9-diskless/initrd.img /tmp
# cd /tmp
# mkdir initrd.test
# cd initrd.test
# cp ../initrd.img .
# mkdir initrd
# cd initrd
# zcat ../initrd.img | cpio -i -c
# cd /sbin
# cp /sbin/mount.nfs .
# cp /sbin/umount.nfs .
# cp /sbin/mount.nfs4 .
# cp /sbin/umount.nfs4 .
# cd ..
# find . | cpio --quiet -c -o | gzip -c > ../initrd-new....
# cd /tftpboot/linux-install/F9-diskless/
# mv initrd.img initrd.img.org
# cp /tmp/initrd-test/initrd-new.img ./initrd.img
-- /tftpboot/linux-install/f9-diskless/initrd.img is gene...
--- system-config-netboot
-- initrd.img is compressed and extracted by zcat and cpi...
-- The file system appear in /tmp/initrd-test/initrd/
-- move to /tmp/initrd-test/initrd/sbin
-- copy nfs information to this system
-- Then we will compressed to initrd-new.img
-- keep the original initrd.img to initrd.img.org
-- copy from initrd-new.img to initrd.img
-- Then this initrd.img should contain nfs information.
-Question: I do not know what is mount.nfs etc. It seems ...
-Question: PXE server is 32 bit. The diskless Linux 64 bi...
-Question: It is ok for us to use 32 bit mount.nfs inform...
** PXE server configuration (old) [#v55565b6]
- make files.custom in /tftpboot/f9/snapshot
- in which we put /home/ for making /home directory
[root@rsaito-necPC rc5.d]# cd /tftpboot/f9/snapshot/
[root@rsaito-necPC snapshot]# ls -l
total 12
drwxrwxr-x 8 root root 4096 2009-05-09 08:57 255
-rw-r--r-- 1 root root 1070 2008-08-26 19:09 files
-rw-r--r-- 1 root root 7 2009-05-09 08:52 files.custom
[root@rsaito-necPC snapshot]# cat files.custom
/home/
** If Selinux complains something, chcon command can be u...
- chcon command is needed for avoiding selinux security.
# cd /tftpboot
# chcon -R -t type .
- the original type is XXX which selinux will be refused.
- We are not sure but we use type =
- We can check the file type by
# ls -Z .
End:
2009.5.21 updated by R. Saito
Current status: finished now we can use the machine as U...
Current problem: it seems that /nfsboot/root should be ma...
http://pre-dawn.net/hiki/?DisklessCluster
http://vision.kuee.kyoto-u.ac.jp/~nob/doc/diskless/diskle...
Current known problem:
-Use ram disk for each PXE client and the server.
-Set common place in nfsboot and client specific place.
-Set update /nfsboot/root update only from one client
A new page for Linux cluster (newtube) is now open.
http://flex.phys.tohoku.ac.jp/english/pukiwiki-e/index.ph...
http://www15.big.or.jp/~yamamori/sun/pxe/nic.html
http://docs.fedoraproject.org/install-guide/f10/
We want to make a diskless computing system so that we ne...
----
Contents
#contents
* Set a small subnet for testing PXE [#f0142583]
**What we need [#pe839496]
- A computer with linux operating system to be configured...
- Computer that acts as a client. For a checking purpose ...
- Network hub and cables.
**Checking [#r1faf503]
***Network setting [#j7b294ed]
- Turn on the hub, connect a network cable from Fedora Li...
- Connect again a network cable from the client computer ...
- Open Network configuration on Fedora Linux using root p...
- Assuming the network card is eth0, we set it to have:
-- IP Address: 192.168.1.10
-- Subnet Mask: 255.255.255.0
- PXE server has a local IP address eth1
-- IP Address: 172.17.7.57
-- Subnet Mask: 255.255.252.0
-- gateway 172.17.4.1
-- nameserver 172.17.4.2
- On the client computer, set the IP Address by staticall...
-- IP Address: 192.168.1.30
-- Subnet Mask: 255.255.255.0
-- gateway 192.168.1.10 (specified by dhcpd.conf and ipfo...
- We adopt the PXE server which will be used as the OS of...
***SSH check [#tad4148a]
- Open SSH software on client computer, for example, Putt...
ssh username@192.168.1.10
- If username is "nugraha" and hostname of server is "rsa...
nugraha@rsaito-necPC:~$
it means that we can access the server from the client.
* Setting for the original Linux machine from which we co...
- We use fedora 10 machine (PXE server itself) for copyin...
- We need to install busy-anaconda in the PXE server mach...
172.17.4.178:# yum install busybox-anaconda
* Setting for the PXE server machine [#s4cd2a84]
** SElinux shoule be permissive mode. [#e2317643]
** Install DHCP and TFTP Server etc [#s9d399d8]
- Install dhcp, syslinux, tftp-server, nfs-utils, system-...
# yum install dhcp
# yum install syslinux
# yum install tftp-server
# yum install nfs-utils
# yum install system-config-netboot
- Check if the software is nicely installed
# rpm -qa | grep syslinux
syslinux-2.2.2.2.2
-- if you can see name + version, then ok. if not, yum in...
** TFTP Configuration [#nfd5db55]
- Edit /etc/xinetd.d/tftp of the PXE server machine
# default: off
# description: The tftp server serves files using the tr...
# protocol. The tftp protocol is often used to bo...
# workstations, download configuration files to ne...
# and to start the installation process for some o...
service tftp
{
disable = no
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -s /tftpboot
per_source = 11
cps = 100 2
flags = IPv4
}
- (1) disable = no, and (2) server_args = -s /tftpboot sh...
- possible troubles: (1) tftp does not work, (2) tftp doe...
- tftpd is running under the xinetd. We restart xinetd
# service xinetd restart
** Copy system data for booting [#v32daf81]
- We will make file systems /nfsboot
# mkdir /nfsboot
- rsync will be used for copying the files.
# rsync -v -a
--exclude='/proc/*' --exclude='/sys/*' --exclude='/dev/*'\
--exclude='/media/*' --exclude='/tmp/*' --exclude='/mi...
/ nfsboot
- 10GB files (10min) are needed. The file system will be ...
- When the original machine (172.17.4.178) is updated. We...
- if we get the file system by network, following command...
# rsync -v -a -e ssh \
--exclude='/proc/*' --exclude='/sys/*' --exclude='/dev/*'\
--exclude='/media/*' --exclude='/tmp/*' --exclude='/mi...
172.17.4.178:/ /nfsboot
** DHCP Configuration [#b4fdd07c]
- Edit /etc/dhcpd.conf. The following is a configuration ...
-- 192.168.1.0/255.255.255.0 addressing
-- Dynamic address will be provided between 192.168.1.100...
-- DHCP server (next server) at IP address 192.168.1.10
allow booting;
allow bootp;
use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
subnet 192.168.1.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.1.255;
range dynamic-bootp 192.168.1.100 192.168.1.240;
next-server 192.168.1.10;
}
host dell { # hostname
hardware ethernet 00:21:70:c9:eb:60; # MA...
fixed-address 192.168.1.30; # correspondi...
filename "/linux-install/pxelinux.0";
}
class "pxeclients" {
match if substring(option vendor-class-identifier...
next-server 192.168.1.10;
filename "/linux-install/pxelinux.0";
}
http://d.hatena.ne.jp/adsaria/20080209
-- Turn on dhcpd
# /sbin/service dhcpd restart
# chkconfig dhcpd on
(the last line is for activating dhcp on booting process)
-- Check if the dhcp server can work.
--- Open a client computer which is connected to server
--- Set the TCP/IP to dynamically set for IP address.
--- Connect by ssh
% putty username@192.168.1.10
---If we can connect, it means DHCP has successfully been...
% ipconfig -a
--- Please keep Mac Address of the client PC
In this case 00-21-70-c9-eb-60 (Dell PC).
--- Mac address will be used in pxelinux.cfg directory.
--- It should be noted that PXE will try to find 01-00-21...
--- (01- should be added at the top)
** NFS configuration [#r08426e2]
- NFS hosts is PXE server (192.168.1.10).
- Edit /etc/exports
/nfsboot 192.168.1.0/255.255.255.0(rw,no_root_squash,asy...
/nfsboot 172.17.4.0/255.255.252.0(rw,no_root_squash,async)
- Change firewall for nfs
-- uncomment MOUNTD_PORT
# Port rpc.mountd should listen on.
-#MOUNTD_PORT=892
+MOUNTD_PORT=892
- Run system-config-firewall
-- add 111 tcp
-- add 111 udp
-- add 892 tcp
-- add 892 udp
--- for 892 port, we set by hand.
http://d.hatena.ne.jp/setq/20090312/1236853536
- Edit /etc/sysconfig/nfs
- check mount from 172.17.4.135
# mkdir /mnt/test
# mount -v -t nfs 172.17.4.128:/nfsboot /mnt/test
# cd /mnt/test
# ls
-- If it does not work, please check the firewall again.
[root@rsaito-necPC rsaito]# cat /etc/exports
-- change filewall
-- file system is opened for 192.168.1.0 network.
-- do not make a space before (ro etc.
-- Start nfs
# service nfs restart
[root@rsaito-necPC etc]# cd /etc/rc5.d/
[root@rsaito-necPC rc5.d]# ./S60nfs restart
Shutting down NFS mountd: ...
Shutting down NFS daemon: ...
Shutting down NFS quotas: ...
Shutting down NFS services: ...
Starting NFS services: ...
Starting NFS quotas: ...
Starting NFS daemon: ...
Starting NFS mountd: ...
[root@rsaito-necPC rc5.d]# ./S60nfs status
rpc.mountd (pid 12153) is running...
nfsd (pid 12150 12149 12148 12147 12146 12145 12144 1214...
rpc.rquotad (pid 12138) is running...
** PXE server configuration [#nd1b2b49]
- files directory is made automatically by
#system-config-netboot
- GNOME System - Administration - Server Setting - Networ...
-- push Diskless button for the first time
-- then Diskless identifier windows starts
Name fedora_10_32bit
Explanation fedora_10_32bit
-- NFS information
server 192.168.1.10
directory /nfsboot
-- Select the kernel in the 2nd row as a newer Kernel
-- Automatically it generate /tftpboot/linux-install/fedo...
--- /tftpboot/linux-install/fedora_10_32bit/initrd.img
--- /tftpboot/linux-install/fedora_10_32bit/vmliuz
-- New windows appear
IP address/subnet 255.255.255.0 <- we use subnet inform...
operating system fedora_10_32bit
Other part should be as it is.
-- /nfsboot/snapshot/255.255.255.0/ will be generated aut...
-- /nfsboot/snapshot/192.168.1.200/ is generated, too aft...
IP address
--- FFFFFF00 (255.255.255.0) file is generated as above.
# cd /tftpboot/linux-install/pxelinux.cfg
# mv default default.org
# ln -s FFFFFF00 01-00-21-70-c9-eb-60
--- when default exists, PXE client first try to read this.
--- 00-21-70-c9-eb-60 is the MAC address of the PXE clien...
--- Mac address appears PXE client and Pause key can be u...
--- PXE try to read 01-00-21-70-c9-eb-60 the file first.
-- An important thing is to put "01-" at the top of the n...
--- If you want to see what kind files the PXE client try...
--- please delete this symbolic link and default then you...
[root@rsaito-necPC pxelinux.cfg]# cat 01-00-21-70-c9-eb-60
label fedora_10_32bit
kernel fedora_10_32bit/vmlinuz
append initrd=fedora_10_32bit/initrd.img root=/dev/r...
NFSROOT=192.168.1.10:/nfsboot ramdisk_size=24753 ETHERN...
SNAPSHOT=255.255.255.0
* Set /nfsboot/root/etc [#k1cf5a81]
- /nfsboot/root will be used the root of PXE client.
-- When /nfsboot/root is changed, PXE client UNIX / will ...
- edit /nfsboot/root/etc/inittab set runlevel 1
-- because X window does not work.
-- later we will change back to 5.
- edit /nfsboot/root/etc/sysconfig/network
[root@rsaito-necPC sysconfig]# cat network
NETWORKING=yes
HOSTNAME=pxe-fefoda10-dell
- edit /nfsboot/root/etc/sysconfig/network-script/ifcfg-e...
- rm ifcfg-eth1 should be removed since we have only one ...
- NIC = network interface card.
[root@rsaito-necPC network-scripts]# cat ifcfg-eth0
# Broadcom Corporation NetXtreme BCM5705_2 Gigabit Ether...
TYPE=Ethernet
DEVICE=eth0
HWADDR=00:21:70:c9:eb:60 <---- set PXE client Mac address
BOOTPROTO=none <---- change dhcp to none
NETMASK=255.255.255.0 <---- set subnet mask
IPADDR=192.168.1.30 <---- set fixed IP address
GATEWAY=192.168.1.10 <---- now PXE server is gatewa...
ONBOOT=yes
USERCTL=yes
PEERDNS=yes
USERCTL=no
PEERDNS=yes
IPV6INIT=no
NM_CONTROLLED=no
* Set PXE client [#j2d1c71b]
- Start BIOS and select BOOT
- Select Network boot (no submenu exist)
- Start PC, If you have PAUSE button the session can be s...
-- until the kernel is opend.
-----
* Problems and Solutions [#ica8fb5c]
** P: init is not found. /disklessrc is not found. [#k858...
*** S: use system-config-netboot [#f7dc6178]
*** S: init should be in /tftpboot/linux-install/32bit_fe...
*** S: the name of "32bit_fedora_10" is specified by syst...
** P: I can find initrd.img but not init itself. [#a22d37...
*** S: If you can expand initrd.img as above, you will fi...
*** S: disklessrc is not generated by system-config-netbo...
** P: nfs is not mountd [#g7d76017]
*** S: setting fire wall is important as above. [#h98b4e80]
-- check NFS4 is selected as trusted services.
-- /etc/rc5.d/S60nfs restart
*** S: you can check the mount the /nfsboot from the othe...
-- from flex. mount -t nfs 172.17.4.128:/nfsboot /mnt/nfs...
-- If you can find root and snapshot directory, it is cor...
[#i3d009ae]
** P: dhcpd does not work [#u9d8ac3d]
*** S: dhcpd is not running. /etc/rc5.d/S65dpcpd restart....
*** S: after dhcpd restarts, /etc/rc5.d/S56xined restart....
*** S: check dhcp function by Windows machine. [#jcfbd8cc]
** P: /etc/resolve.conf is not correct. [#mfece086]
*** S: resolve.conf is generated the host computor which ...
** P: some file can not be downloaded by Selinux [#x86222...
*** S: stop SeLinux for a moment and check it again. [#k7...
*** S: we should change the file type. checked by ls -Z. ...
** P: How to know the contents initrd.img which is genera...
*** S: The solution is given by using cpio command [#t28d...
-- extract initrd.img
# cd /boot
# mkdir initrd-2.4.9
# cd initrd-2.4.9
# zcat ../initrd-2.4.9.img | cpio -i -c
-- compress initrd.img
# cd /boot/initrd-2.4.9
# find . | cpio --quiet -c -o | gzip -c > ../initrd-2.4....
** P: X window is not running and the OS can not be used....
*** S: edit /nfsboot/root/etc/inittab then change ranlev...
** P: X window should be adjusted to new computor [#y68e0...
*** S: The following seems to work. [#ca6e98a9]
1. Run X -configure which makes /root/xorg.conf.new
2. cp /root/xorg.conf.new /etc/X11/xorg.conf
3. xorgcfg -texmode
4. startx
5 if it does not work, edit /etc/X11/xorg.conf (Chang...
6. startx again
*** S: If it does not work, try to do the following, too....
# Xorg -configure
Then /root/xorg.conf.new generates. Check this files work...
# X -config /root/xorg.conf.new
If X starts nicely, press [Ctrl]+[Alt]+[F1] to go back to...
# mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
# mv /root/xorg.conf.new /etc/X11/xorg.conf
That is all. Reboot this.
http://argon.bus.osaka-cu.ac.jp/index.php?Xorg%20%A4%CE%C...
** P: from PXE client, we can not go to 172.17.4.0 networ...
*** S: in PXE server (192.168.1.10) Edit /etc/sysctl.conf...
*** S: IP forwarding is necessary. [#te79d994]
net.ipv4.ip_forward = 1
for runntine
# echo 1 > /proc/sys/net/ipv4/ip_forward
for setting
# sysctl -p
net.ipv4.ip_forward = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
Then System-> Administration -> Fireall Then select Masq...
Check -- All eth+ devices -- then apply.
# service network restart
** P: SuperMicro?, X7DCA-L motherboad does not have PXE b...
*** S: Edit BIOS Advanced -> PCI configuration then NIC b...
*** S: Then set BOOT order by pushing "x" or "+" or "-". ...
** P: What kind NIC does support PXE or IAS [#bf3f8fbf]
http://www.intel.com/products/desktop/adapters/pro1000gt/...
* Links for references [#w46d28ec]
http://takedarts.jp/index.php?%A5%C7%A5%A3%A5%B9%A5%AF%A5...
http://www.linux.or.jp/JF/JFdocs/Authentication-Gateway-H...
http://tomo.ac/goodstream/fedoracore/fc3/fw-fc3.html
http://lumber-mill.co.jp/gallery/view/tips/linux/fedora
* Directrories and files [#m7b27303]
** PXE server [#tb8d1efc]
*** /tftpboot [#de1a36a7]
- /tftpboot/linux-install/ system-config-network uses t...
-- /tftpboot/linux-install/fedora_10_32bit initrd.img and...
-- /tftpboot/linux-install/pxelinux.cfg the initial file...
--- /tftpboot/linux-install/pxelinux.cfg/default this sho...
--- /tftpboot/linux-install/pxelinux.cfg/FFFFFF00 255.255...
--- /tftpboot/linux-install/pxelinux.o
--- /tftpboot/linux-install/msgs
*** /nfsboot [#d3b22c64]
- /nfsboot/root
- /nfsboot/snapshot
** PXE client [#zd8ff696]
When we try to find "disklessrc fedora", we found the fol...
http://d.hatena.ne.jp/adsaria/20080131/1201792574
http://wikiwiki.jp/disklessfun/?FrontPage
----
* The following is the statements which are evetually not...
-System boot will be put on /tftpboot and we need to copy...
su -
cd /tftpboot
cp /usr/lib/syslinux/pxelinux.0 .
-Create a minimal /tftpboot/pxelinux.cfg file
DEFAULT pxeboot
TIMEOUT 50
LABEL pxeboot
KERNEL vmlinuz
APPEND initrd=initrd.img
ONERROR LOCALBOOT 0
-Turn on the tftp service:
# /sbin/chkconfig tftp on
-- The following is another sample dhcpd.conf by specifyi...
# dhcpd.conf
# common place for all
use-host-decl-names on; host name and the host name in c...
default-lease-time 600;
max-lease-time 7200;
#
# common for a subnet, we can make a group of host by "h...
subnet 192.168.197.0 netmask 255.255.255.0 {
# range 204.254.239.10 204.254.239.20;? in the case of d...
option domain-name "dc2.kek.jp";
option broadcast-address 192.168.197.255;
option routers 192.168.197.1;
}
#
#host entities The following is how to set static IP add...
host n011 { since use-host-decl-names is on, we can use ...
hardware ethernet 00:D0:B7:1B:12:ED; MAC address
fixed-address 192.168.197.31; static IP address for n011
option dhcp-class-identifier "PXEClient"; needed for PXE
option next-server 192.168.197.11; specify for PXE server
is provided by PXE Proxy DHCP server
}
# vendor-encapusulated option "next-server" can specify ...
** Edit initrd.img for NFS mount [#y864dbff]
-- We just follow the instruction at
http://www.atmarkit.co.jp/flinux/rensai/linuxtips/a021pxe...
--- However mount command does not work correctly
http://www.devdrv.co.jp/linux/cpio-initrd-format.htm
http://blogs.yahoo.co.jp/natto_heaven/11513467.html
# cp /tftpboot/linux-install/f9-diskless/initrd.img /tmp
# cd /tmp
# mkdir initrd.test
# cd initrd.test
# cp ../initrd.img .
# mkdir initrd
# cd initrd
# zcat ../initrd.img | cpio -i -c
# cd /sbin
# cp /sbin/mount.nfs .
# cp /sbin/umount.nfs .
# cp /sbin/mount.nfs4 .
# cp /sbin/umount.nfs4 .
# cd ..
# find . | cpio --quiet -c -o | gzip -c > ../initrd-new....
# cd /tftpboot/linux-install/F9-diskless/
# mv initrd.img initrd.img.org
# cp /tmp/initrd-test/initrd-new.img ./initrd.img
-- /tftpboot/linux-install/f9-diskless/initrd.img is gene...
--- system-config-netboot
-- initrd.img is compressed and extracted by zcat and cpi...
-- The file system appear in /tmp/initrd-test/initrd/
-- move to /tmp/initrd-test/initrd/sbin
-- copy nfs information to this system
-- Then we will compressed to initrd-new.img
-- keep the original initrd.img to initrd.img.org
-- copy from initrd-new.img to initrd.img
-- Then this initrd.img should contain nfs information.
-Question: I do not know what is mount.nfs etc. It seems ...
-Question: PXE server is 32 bit. The diskless Linux 64 bi...
-Question: It is ok for us to use 32 bit mount.nfs inform...
** PXE server configuration (old) [#v55565b6]
- make files.custom in /tftpboot/f9/snapshot
- in which we put /home/ for making /home directory
[root@rsaito-necPC rc5.d]# cd /tftpboot/f9/snapshot/
[root@rsaito-necPC snapshot]# ls -l
total 12
drwxrwxr-x 8 root root 4096 2009-05-09 08:57 255
-rw-r--r-- 1 root root 1070 2008-08-26 19:09 files
-rw-r--r-- 1 root root 7 2009-05-09 08:52 files.custom
[root@rsaito-necPC snapshot]# cat files.custom
/home/
** If Selinux complains something, chcon command can be u...
- chcon command is needed for avoiding selinux security.
# cd /tftpboot
# chcon -R -t type .
- the original type is XXX which selinux will be refused.
- We are not sure but we use type =
- We can check the file type by
# ls -Z .
Page:
![[PukiWiki]](image/c60.png "[PukiWiki]")
