SATA box の設定 (公開)
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
|
ログイン
]
開始行:
[[ SATA box の設定 (公開)]]
2008.10 現在 flex に接続している SATA HDD Box
の設定方法を記録。
2008.10.25 by R. Saito
SATA box でハードディスクを認識するには、
sata_sil24 というドライバーを除き
si3132r5.ko というドライバーをインストールする必要がある。
以下はその手順と、その後のフォーマットの方法を示したもの。
#contents
** 機種名 [#x211a969]
- Century Corp. ドライブドア、SATA ボックス レイド
- HDD 1TB x 4
- http://www.century.co.jp/
** PCIe interface カードに対する driver の作製。 [#ja71c...
- Silicon Image 社から driver のソースをダウンロード
-- ダウンロードしたドライバは既にFLEXにある。
/home/skel/driver/sil3132/si3132r5_RHEL43_32bit_v1087_dr...
-- [[Silicon Image 社:http://www.siliconimage.com]]のウェ...
-- Supportをクリックし、次のようにメニューを選択して行く。
Step 1 : Sil3132 - PCI Express (1x) to 2 Port SATA300
Step 2 : Driver
Step 3 : Linux 32-bit
Goを押すと
Support Search Results
Product: SiI3132 - PCI Express (1x) to 2 Port SATA300
Category: Driver
O/S: Linux 32-bit
から始まるウェブページがあらわれる。ページ内から最新のド...
取得する。2008年10月25日における最新の[[32bitのCentOS用の...
SiI 3132 32-bit Red Hat Enterprise Linux 4.0 Update 3 SA...
Management Utility & Driver for 32bit AMD and 32bit EMT64T
Version : 1.0.8.7
Date : 11/19/2006
- ドライバの作成とインストール
-- ファイルを展開する
tar zxf si3132r5_RHEL43_32bit_v1087_driver_and_GUI.tar.gz
cd driver
-- ドライバを取り出す
cat modules.cgz | gunzip | cpio -ivH crc
-- FLEX用にSMP(CPUが複数個あるコンピューター)カーネル用...
cd 2.6.9-34.ELsmp
cp /lib/modules/`uname -r`/kernel/drivers/scsi si3132r5.ko
cd /lib/modules/`uname -r`/kernel/drivers/scsi
** Linux Kernel に driver module の組み込み [#rb704c54]
- 全ての作業は、flex を落とすことなくできる。
- uname -a で現在の Kernel のバージョンがわかる。
- バージョンに該当する場所に移動
cd /lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/scsi
- module の表示
lsmod
- module の消去は rmmod コマンドを用いる。
- もしsata_sil24というドライバが組み込まれていたら、これ...
rmmod sata_sil24
- module の追加は
insmod si3132r5.ko
- 再起動したときに自動でmoduleが読み込まれるように/etc/mo...
- modprobe.confに次を追加する。scsi_hostadapter1という名...
alias scsi_hostadapter1 sata_sil24 <- あったら削除
alias scsi_hostadapter1 si3132r5 <- 追加
- 再起動時にドライバが読み込まれないときは上記の作業を再...
** 電源を入れ、device の認識の確認。 [#vcd44c0d]
- 電源を入れると、デバイスを認識したメッセージがつく。
- このメッセージの中に、/dev/sde にするという内容があるの...
- また SATA box の4つのLEDが点灯する。
- このデバイスは SCSI として認識。
flex48:scsi% cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDT722525DLA380 Rev: V44O
Type: Direct-Access ANSI SCSI revi...
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDT722525DLA380 Rev: V44O
Type: Direct-Access ANSI SCSI revi...
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDT722525DLA380 Rev: V44O
Type: Direct-Access ANSI SCSI revi...
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDT722525DLA380 Rev: V44O
Type: Direct-Access ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 31 Lun: 00
Vendor: SI Model: Pseudo Device Rev: 0000
Type: Processor ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 00 Lun: 00
Vendor: WDC WD10 Model: EACS-00D6B0 Rev: 01.0
Type: Direct-Access ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 01 Lun: 00
Vendor: WDC WD10 Model: EACS-00D6B0 Rev: 01.0
Type: Direct-Access ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 02 Lun: 00
Vendor: WDC WD10 Model: EACS-00D6B0 Rev: 01.0
Type: Direct-Access ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 03 Lun: 00
Vendor: WDC WD10 Model: EACS-00D6B0 Rev: 01.0
Type: Direct-Access ANSI SCSI revi...
- WDC と記されているものが該当。
- /dev/sde, /dev/sdf, /dev/sdg, /dev/sgh が対応。
** Partition の作製 [#b713d988]
- fdisk コマンドで、全て Linux のfile system を作る。
[root@flex scsi]# tcsh
[rsaito@flex scsi]$ setenv LANG C
[rsaito@flex scsi]$ fdisk /dev/sdf
Device contains neither a valid DOS partition table, nor...
SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in mem...
until you decide to write them. After that, of course, t...
content won't be recoverable.
- これは、まだ何もpartition が設定されていないことを意味...
The number of cylinders for this disk is set to 121601.
There is nothing wrong with that, but this is larger tha...
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions o...
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will b...
- n で新しいパーティションを作る。p primary 1 番目 最初...
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-121601, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-121601, de...
Using default value 121601
- m は、ただコマンドのリストを表示。
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
- p: 現在作った partition を表示
Command (m for help): p
Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id S...
/dev/sdf1 1 121601 976760001 83 ...
- w: これを実際にHDDに書き込む。
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
- これで無事終了。次は フォーマット。
** Partition のフォーマット [#z10b3b70]
- mke2fs コマンドを用いる。-j は、ext3 タイプのフォーマッ...
[rsaito@flex scsi]$ mke2fs -j /dev/sdf
mke2fs 1.35 (28-Feb-2004)
/dev/sdf is entire device, not just one partition!
Proceed anyway? (y,n) y
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
122109952 inodes, 244190646 blocks
12209532 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=247463936
7453 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884...
4096000, 7962624, 11239424, 20480000, 23887872, 7...
102400000, 214990848
- inode table への書き込みに数分時間がかかる。
Writing inode tables: 3783/7453
- 最後にsuperblock に filesystem の情報の書き込みが行わ...
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting informatio...
This filesystem will be automatically checked every 29 m...
180 days, whichever comes first. Use tune2fs -c or -i t...
- 最後にこのfile system をマウントできるかどうか確認。
** file system のマウント [#e4b46e31]
- /mnt にマウントポイント(マウントする場所)を mkdir で...
[rsaito@flex scsi]$ cd /mnt
[rsaito@flex /mnt]$ ls
cdrom fd home home2 root rsaito-old samba sata1 ...
[rsaito@flex /mnt]$ mkdir sata2
[rsaito@flex /mnt]$ mount /dev/sdf /mnt/sata2
[rsaito@flex /mnt]$ df
Filesystem 1K-blocks Used Available Use% ...
/dev/mapper/VG-LVroot
20642428 6770492 12823488 35% /
/dev/md0 101018 77539 18263 81% ...
none 2037136 0 2037136 0% ...
/dev/mapper/VG-LVrsaito
30963708 12565892 16824952 43% ...
/dev/mapper/VG-LVhome
216745980 201390404 4345528 98% ...
/dev/mapper/VG-LVwww 20642428 5947524 13646328 31% ...
172.17.4.129:/pmphdd1
480719072 161512480 294787392 36% ...
/dev/mapper/VG-LVsamba
20642428 11212352 8381500 58% ...
172.17.4.134:/home1 236347936 201413376 22928784 90% ...
/dev/sdf 961434656 110656 912485872 1% ...
- /mnt/sata2 にマウントできている。
- アンマウントもできることも確認
[rsaito@flex /mnt]$ umount /mnt/sata2
[rsaito@flex /mnt]$ df
Filesystem 1K-blocks Used Available Use% ...
/dev/mapper/VG-LVroot
20642428 6770492 12823488 35% /
/dev/md0 101018 77539 18263 81% ...
none 2037136 0 2037136 0% ...
/dev/mapper/VG-LVrsaito
30963708 12565892 16824952 43% ...
/dev/mapper/VG-LVhome
216745980 201390404 4345528 98% ...
/dev/mapper/VG-LVwww 20642428 5947524 13646328 31% ...
172.17.4.129:/pmphdd1
480719072 161512480 294787392 36% ...
/dev/mapper/VG-LVsamba
20642428 11212352 8381500 58% ...
172.17.4.134:/home1 236347936 201413376 22928784 90% ...
- 確認。この作業を /dev/sde, /dev/sdf, /dev/sdg, /dev/sd...
** /home2 の移動。 [#t4646908]
- autofs で、/misc/sata1/home2 を automount
- /etc/auto.misc を編集
home1 -w 172.17.4.134:/home1
home3 -w 172.17.4.136:/home
sata1 -fstype=ext3 :/dev/sde
- 最後の行を実行。
- autofs を再実行 /etc/rs5.d
[root@flex rc5.d]# ./S28autofs restart
automount を停止中: ...
automount を起動中: ...
- df -B G でマウントを確認
# cd /misc/sata1
# df -B G (G byte 単位で表示)
[root@flex /]# df -B G
Filesystem 1G-ブロック 使用 使用可 使用% ...
/dev/mapper/VG-LVroot
20G 7G 13G 35% /
/dev/md0 1G 1G 1G 81% ...
none 2G 0G 2G 0% ...
/dev/mapper/VG-LVrsaito
30G 12G 17G 43% ...
/dev/mapper/VG-LVhome
207G 193G 5G 98% ...
/dev/mapper/VG-LVwww 20G 6G 14G 31% ...
172.17.4.129:/pmphdd1
459G 155G 282G 36% ...
/dev/mapper/VG-LVsamba
20G 11G 8G 58% ...
/dev/sde 917G 16G 855G 2% ...
- tar コマンドで、現在の /home2 の内容を /misc/sata1/hom...
[root@flex home2]# pwd
/home2
[root@flex home2]# nohup tar cf - ./ | (cd /misc/sata1/h...
- nohup で、logout してもJOBを実行可能。
- 最後に /home2 のシンボリックリンクを変更。
** 今後の方針 [#b5f502e4]
*** /dev/sde -> /misc/sata1 [#c1f5c26d]
- sata1 の構成
-- /home2 サンバサーバ 500G まで。
-- /home1 学生の空間 300G まで。
*** tube の /home1 など、ファイルサーバーをこの SATA ...
- そのために、ネットワークの設定など(192.168.1.0 を Fl...
- /home2 の2008.8現在の場所
FLEXからmountで見ると
172.17.4.129:/pmphdd1 on /pmphdd type nfs (rw,addr=172.1...
となっているHDDです。
*** RAID の設定を考える。RAIDの勉強が必要。安全性を重視...
終了行:
[[ SATA box の設定 (公開)]]
2008.10 現在 flex に接続している SATA HDD Box
の設定方法を記録。
2008.10.25 by R. Saito
SATA box でハードディスクを認識するには、
sata_sil24 というドライバーを除き
si3132r5.ko というドライバーをインストールする必要がある。
以下はその手順と、その後のフォーマットの方法を示したもの。
#contents
** 機種名 [#x211a969]
- Century Corp. ドライブドア、SATA ボックス レイド
- HDD 1TB x 4
- http://www.century.co.jp/
** PCIe interface カードに対する driver の作製。 [#ja71c...
- Silicon Image 社から driver のソースをダウンロード
-- ダウンロードしたドライバは既にFLEXにある。
/home/skel/driver/sil3132/si3132r5_RHEL43_32bit_v1087_dr...
-- [[Silicon Image 社:http://www.siliconimage.com]]のウェ...
-- Supportをクリックし、次のようにメニューを選択して行く。
Step 1 : Sil3132 - PCI Express (1x) to 2 Port SATA300
Step 2 : Driver
Step 3 : Linux 32-bit
Goを押すと
Support Search Results
Product: SiI3132 - PCI Express (1x) to 2 Port SATA300
Category: Driver
O/S: Linux 32-bit
から始まるウェブページがあらわれる。ページ内から最新のド...
取得する。2008年10月25日における最新の[[32bitのCentOS用の...
SiI 3132 32-bit Red Hat Enterprise Linux 4.0 Update 3 SA...
Management Utility & Driver for 32bit AMD and 32bit EMT64T
Version : 1.0.8.7
Date : 11/19/2006
- ドライバの作成とインストール
-- ファイルを展開する
tar zxf si3132r5_RHEL43_32bit_v1087_driver_and_GUI.tar.gz
cd driver
-- ドライバを取り出す
cat modules.cgz | gunzip | cpio -ivH crc
-- FLEX用にSMP(CPUが複数個あるコンピューター)カーネル用...
cd 2.6.9-34.ELsmp
cp /lib/modules/`uname -r`/kernel/drivers/scsi si3132r5.ko
cd /lib/modules/`uname -r`/kernel/drivers/scsi
** Linux Kernel に driver module の組み込み [#rb704c54]
- 全ての作業は、flex を落とすことなくできる。
- uname -a で現在の Kernel のバージョンがわかる。
- バージョンに該当する場所に移動
cd /lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/scsi
- module の表示
lsmod
- module の消去は rmmod コマンドを用いる。
- もしsata_sil24というドライバが組み込まれていたら、これ...
rmmod sata_sil24
- module の追加は
insmod si3132r5.ko
- 再起動したときに自動でmoduleが読み込まれるように/etc/mo...
- modprobe.confに次を追加する。scsi_hostadapter1という名...
alias scsi_hostadapter1 sata_sil24 <- あったら削除
alias scsi_hostadapter1 si3132r5 <- 追加
- 再起動時にドライバが読み込まれないときは上記の作業を再...
** 電源を入れ、device の認識の確認。 [#vcd44c0d]
- 電源を入れると、デバイスを認識したメッセージがつく。
- このメッセージの中に、/dev/sde にするという内容があるの...
- また SATA box の4つのLEDが点灯する。
- このデバイスは SCSI として認識。
flex48:scsi% cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDT722525DLA380 Rev: V44O
Type: Direct-Access ANSI SCSI revi...
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDT722525DLA380 Rev: V44O
Type: Direct-Access ANSI SCSI revi...
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDT722525DLA380 Rev: V44O
Type: Direct-Access ANSI SCSI revi...
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDT722525DLA380 Rev: V44O
Type: Direct-Access ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 31 Lun: 00
Vendor: SI Model: Pseudo Device Rev: 0000
Type: Processor ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 00 Lun: 00
Vendor: WDC WD10 Model: EACS-00D6B0 Rev: 01.0
Type: Direct-Access ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 01 Lun: 00
Vendor: WDC WD10 Model: EACS-00D6B0 Rev: 01.0
Type: Direct-Access ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 02 Lun: 00
Vendor: WDC WD10 Model: EACS-00D6B0 Rev: 01.0
Type: Direct-Access ANSI SCSI revi...
Host: scsi8 Channel: 01 Id: 03 Lun: 00
Vendor: WDC WD10 Model: EACS-00D6B0 Rev: 01.0
Type: Direct-Access ANSI SCSI revi...
- WDC と記されているものが該当。
- /dev/sde, /dev/sdf, /dev/sdg, /dev/sgh が対応。
** Partition の作製 [#b713d988]
- fdisk コマンドで、全て Linux のfile system を作る。
[root@flex scsi]# tcsh
[rsaito@flex scsi]$ setenv LANG C
[rsaito@flex scsi]$ fdisk /dev/sdf
Device contains neither a valid DOS partition table, nor...
SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in mem...
until you decide to write them. After that, of course, t...
content won't be recoverable.
- これは、まだ何もpartition が設定されていないことを意味...
The number of cylinders for this disk is set to 121601.
There is nothing wrong with that, but this is larger tha...
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions o...
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will b...
- n で新しいパーティションを作る。p primary 1 番目 最初...
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-121601, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-121601, de...
Using default value 121601
- m は、ただコマンドのリストを表示。
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
- p: 現在作った partition を表示
Command (m for help): p
Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id S...
/dev/sdf1 1 121601 976760001 83 ...
- w: これを実際にHDDに書き込む。
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
- これで無事終了。次は フォーマット。
** Partition のフォーマット [#z10b3b70]
- mke2fs コマンドを用いる。-j は、ext3 タイプのフォーマッ...
[rsaito@flex scsi]$ mke2fs -j /dev/sdf
mke2fs 1.35 (28-Feb-2004)
/dev/sdf is entire device, not just one partition!
Proceed anyway? (y,n) y
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
122109952 inodes, 244190646 blocks
12209532 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=247463936
7453 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884...
4096000, 7962624, 11239424, 20480000, 23887872, 7...
102400000, 214990848
- inode table への書き込みに数分時間がかかる。
Writing inode tables: 3783/7453
- 最後にsuperblock に filesystem の情報の書き込みが行わ...
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting informatio...
This filesystem will be automatically checked every 29 m...
180 days, whichever comes first. Use tune2fs -c or -i t...
- 最後にこのfile system をマウントできるかどうか確認。
** file system のマウント [#e4b46e31]
- /mnt にマウントポイント(マウントする場所)を mkdir で...
[rsaito@flex scsi]$ cd /mnt
[rsaito@flex /mnt]$ ls
cdrom fd home home2 root rsaito-old samba sata1 ...
[rsaito@flex /mnt]$ mkdir sata2
[rsaito@flex /mnt]$ mount /dev/sdf /mnt/sata2
[rsaito@flex /mnt]$ df
Filesystem 1K-blocks Used Available Use% ...
/dev/mapper/VG-LVroot
20642428 6770492 12823488 35% /
/dev/md0 101018 77539 18263 81% ...
none 2037136 0 2037136 0% ...
/dev/mapper/VG-LVrsaito
30963708 12565892 16824952 43% ...
/dev/mapper/VG-LVhome
216745980 201390404 4345528 98% ...
/dev/mapper/VG-LVwww 20642428 5947524 13646328 31% ...
172.17.4.129:/pmphdd1
480719072 161512480 294787392 36% ...
/dev/mapper/VG-LVsamba
20642428 11212352 8381500 58% ...
172.17.4.134:/home1 236347936 201413376 22928784 90% ...
/dev/sdf 961434656 110656 912485872 1% ...
- /mnt/sata2 にマウントできている。
- アンマウントもできることも確認
[rsaito@flex /mnt]$ umount /mnt/sata2
[rsaito@flex /mnt]$ df
Filesystem 1K-blocks Used Available Use% ...
/dev/mapper/VG-LVroot
20642428 6770492 12823488 35% /
/dev/md0 101018 77539 18263 81% ...
none 2037136 0 2037136 0% ...
/dev/mapper/VG-LVrsaito
30963708 12565892 16824952 43% ...
/dev/mapper/VG-LVhome
216745980 201390404 4345528 98% ...
/dev/mapper/VG-LVwww 20642428 5947524 13646328 31% ...
172.17.4.129:/pmphdd1
480719072 161512480 294787392 36% ...
/dev/mapper/VG-LVsamba
20642428 11212352 8381500 58% ...
172.17.4.134:/home1 236347936 201413376 22928784 90% ...
- 確認。この作業を /dev/sde, /dev/sdf, /dev/sdg, /dev/sd...
** /home2 の移動。 [#t4646908]
- autofs で、/misc/sata1/home2 を automount
- /etc/auto.misc を編集
home1 -w 172.17.4.134:/home1
home3 -w 172.17.4.136:/home
sata1 -fstype=ext3 :/dev/sde
- 最後の行を実行。
- autofs を再実行 /etc/rs5.d
[root@flex rc5.d]# ./S28autofs restart
automount を停止中: ...
automount を起動中: ...
- df -B G でマウントを確認
# cd /misc/sata1
# df -B G (G byte 単位で表示)
[root@flex /]# df -B G
Filesystem 1G-ブロック 使用 使用可 使用% ...
/dev/mapper/VG-LVroot
20G 7G 13G 35% /
/dev/md0 1G 1G 1G 81% ...
none 2G 0G 2G 0% ...
/dev/mapper/VG-LVrsaito
30G 12G 17G 43% ...
/dev/mapper/VG-LVhome
207G 193G 5G 98% ...
/dev/mapper/VG-LVwww 20G 6G 14G 31% ...
172.17.4.129:/pmphdd1
459G 155G 282G 36% ...
/dev/mapper/VG-LVsamba
20G 11G 8G 58% ...
/dev/sde 917G 16G 855G 2% ...
- tar コマンドで、現在の /home2 の内容を /misc/sata1/hom...
[root@flex home2]# pwd
/home2
[root@flex home2]# nohup tar cf - ./ | (cd /misc/sata1/h...
- nohup で、logout してもJOBを実行可能。
- 最後に /home2 のシンボリックリンクを変更。
** 今後の方針 [#b5f502e4]
*** /dev/sde -> /misc/sata1 [#c1f5c26d]
- sata1 の構成
-- /home2 サンバサーバ 500G まで。
-- /home1 学生の空間 300G まで。
*** tube の /home1 など、ファイルサーバーをこの SATA ...
- そのために、ネットワークの設定など(192.168.1.0 を Fl...
- /home2 の2008.8現在の場所
FLEXからmountで見ると
172.17.4.129:/pmphdd1 on /pmphdd type nfs (rw,addr=172.1...
となっているHDDです。
*** RAID の設定を考える。RAIDの勉強が必要。安全性を重視...
ページ名: