Most web browsers available today support proxying and are easily configured to use a Squid server as a proxy. Some browsers support advanced features such as lists of domains or URL patterns that shouldn't be fetched through the proxy, or JavaScript automatic proxy configuration.
Select Network Preferences from the Options menu. On the Proxies page, click the radio button next to Manual Proxy Configuration and then click on the View button. For each protocol that your Squid server supports (by default, HTTP, FTP, and gopher) enter the Squid server's hostname or IP address and put the HTTP port number for the Squid server (by default, 3128) in the Port column. For any protocols that your Squid does not support, leave the fields blank.
Here is a screen shot of the Netscape Navigator manual proxy configuration screen.
Netscape Navigator's proxy configuration can be automated with JavaScript (for Navigator versions 2.0 or higher). Select Network Preferences from the Options menu. On the Proxies page, click the radio button next to Automatic Proxy Configuration and then fill in the URL for your JavaScript proxy configuration file in the text box. The box is too small, but the text will scroll to the right as you go.
Here is a screen shot of the Netscape Navigator automatic proxy configuration screen.
You may also wish to consult Netscape's documentation for the Navigator JavaScript proxy configuration
Here is a sample auto configuration JavaScript from Oskar Pearson:
//We (www.is.co.za) run a central cache for our customers that they
//access through a firewall - thus if they want to connect to their intranet
//system (or anything in their domain at all) they have to connect
//directly - hence all the "fiddling" to see if they are trying to connect
//to their local domain.
//Replace each occurrence of company.com with your domain name
//and if you have some kind of intranet system, make sure
//that you put it's name in place of "internal" below.
//We also assume that your cache is called "cache.company.com", and
//that it runs on port 8080. Change it down at the bottom.
//(C) Oskar Pearson and the Internet Solution (http://www.is.co.za)
function FindProxyForURL(url, host)
{
//If they have only specified a hostname, go directly.
if (isPlainHostName(host))
return "DIRECT";
//These connect directly if the machine they are trying to
//connect to starts with "intranet" - ie http://intranet
//Connect directly if it is intranet.*
//If you have another machine that you want them to
//access directly, replace "internal*" with that
//machine's name
if (shExpMatch( host, "intranet*")||
shExpMatch(host, "internal*"))
return "DIRECT";
//Connect directly to our domains (NB for Important News)
if (dnsDomainIs( host,"company.com")||
//If you have another domain that you wish to connect to
//directly, put it in here
dnsDomainIs(host,"sistercompany.com"))
return "DIRECT";
//So the error message "no such host" will appear through the
//normal Netscape box - less support queries :)
if (!isResolvable(host))
return "DIRECT";
//We only cache http, ftp and gopher
if (url.substring(0, 5) == "http:" ||
url.substring(0, 4) == "ftp:"||
url.substring(0, 7) == "gopher:")
//Change the ":8080" to the port that your cache
//runs on, and "cache.company.com" to the machine that
//you run the cache on
return "PROXY cache.company.com:8080; DIRECT";
//We don't cache WAIS
if (url.substring(0, 5) == "wais:")
return "DIRECT";
else
return "DIRECT";
}
For Mosaic and Lynx, you can set environment variables before starting the application. For example (assuming csh or tcsh):
% setenv http_proxy http://mycache.example.com:3128/
% setenv gopher_proxy http://mycache.example.com:3128/
% setenv ftp_proxy http://mycache.example.com:3128/
For Lynx you can also edit the lynx.cfg file to configure proxy usage. This has the added benefit of causing all Lynx users on a system to access the proxy without making environment variable changes for each user. For example:
http_proxy:http://mycache.example.com:3128/
ftp_proxy:http://mycache.example.com:3128/
gopher_proxy:http://mycache.example.com:3128/
There's one nasty side-effect to using auto-proxy scripts: if you start the web browser it will try and load the auto-proxy-script.
If your script isn't available either because the web server hosting the script is down or your workstation can't reach the web server (e.g. because you're working off-line with your notebook and just want to read a previously saved HTML-file) you'll get different errors depending on the browser you use.
The Netscape browser will just return an error after a timeout (after that it tries to find the site 'www.proxy.com' if the script you use is called 'proxy.pac').
The Microsoft Internet Explorer on the other hand won't even start, no window displays, only after about 1 minute it'll display a window asking you to go on with/without proxy configuration.
The point is that your workstations always need to locate the proxy-script. I created some extra redundancy by hosting the script on two web servers (actually Apache web servers on the proxy servers themselves) and adding the following records to my primary nameserver:
proxy CNAME proxy1
CNAME proxy2
The clients just refer to 'http://proxy/proxy.pac'. This script looks like this:
function FindProxyForURL(url,host)
{
// Hostname without domainname or host within our own domain?
// Try them directly:
// http://www.domain.com actually lives before the firewall, so
// make an exception:
if ((isPlainHostName(host)||dnsDomainIs( host,".domain.com")) &&
!localHostOrDomainIs(host, "www.domain.com"))
return "DIRECT";
// First try proxy1 then proxy2. One server mostly caches '.com'
// to make sure both servers are not
// caching the same data in the normal situation. The other
// server caches the other domains normally.
// If one of 'm is down the client will try the other server.
else if (shExpMatch(host, "*.com"))
return "PROXY proxy1.domain.com:8080; PROXY proxy2.domain.com:8081; DIRECT";
return "PROXY proxy2.domain.com:8081; PROXY proxy1.domain.com:8080; DIRECT";
}
I made sure every client domain has the appropriate 'proxy' entry. The clients are automatically configured with two nameservers using DHCP.
-- Rodney van den Oever
Select Options from the View menu. Click on the Connection tab. Tick the Connect through Proxy Server option and hit the Proxy Settings button. For each protocol that your Squid server supports (by default, HTTP, FTP, and gopher) enter the Squid server's hostname or IP address and put the HTTP port number for the Squid server (by default, 3128) in the Port column. For any protocols that your Squid does not support, leave the fields blank.
Here is a screen shot of the Internet Explorer proxy configuration screen.
Microsoft is also starting to support Netscape-style JavaScript automated proxy configuration. As of now, only MSIE version 3.0a for Windows 3.1 and Windows NT 3.51 supports this feature (i.e., as of version 3.01 build 1225 for Windows 95 and NT 4.0, the feature was not included).
If you have a version of MSIE that does have this feature, elect Options from the View menu. Click on the Advanced tab. In the lower left-hand corner, click on the Automatic Configuration button. Fill in the URL for your JavaScript file in the dialog box it presents you. Then exit MSIE and restart it for the changes to take effect. MSIE will reload the JavaScript file every time it starts.
Netmanage WebSurfer supports manual proxy configuration and exclusion lists for hosts or domains that should not be fetched via proxy (this information is current as of WebSurfer 5.0). Select Preferences from the Settings menu. Click on the Proxies tab. Select the Use Proxy options for HTTP, FTP, and gopher. For each protocol that enter the Squid server's hostname or IP address and put the HTTP port number for the Squid server (by default, 3128) in the Port boxes. For any protocols that your Squid does not support, leave the fields blank.
Take a look at this screen shot if the instructions confused you.
On the same configuration window, you'll find a button to bring up the exclusion list dialog box, which will let you enter some hosts or domains that you don't want fetched via proxy. It should be self-explanatory, but you might look at this screen shot just for fun anyway.
Select Proxy Servers... from the Preferences menu. Check each protocol that your Squid server supports (by default, HTTP, FTP, and Gopher) and enter the Squid server's address as hostname:port (e.g. mycache.example.com:3128 or 123.45.67.89:3128). Click on Okay to accept the setup.
Notes:
-- Hume Smith
Insert your username in the host part of the URL, for example:
ftp://joecool@ftp.foo.org/
Squid should then prompt you for your account password. Alternatively,
you can specify both your username and password in the URL itself:
ftp://joecool:secret@ftp.foo.org/
However, we certainly do not recommend this, as it could be very
easy for someone to see or grab your password.