The cache manager (cachemgr.cgi) is a CGI utility for displaying statistics about the squid process as it runs. The cache manager is a convenient way to manage the cache and view statistics without logging into the server.
That depends on which web server you're using. Below you will find instructions for configuring the CERN and Apache servers to permit cachemgr.cgi usage.
EDITOR"S NOTE: readers are encouraged to submit instructions for configuration of cachemgr.cgi on other web server platforms, such as Netscape.
After you edit the server configuration files, you will probably
need to either restart your web server or or send it a SIGHUP signal
to tell it to re-read its configuration files.
When you're done configuring your web server, you'll connect to the cache manager with a web browser, using a URL such as:
http://www.example.com/Squid/cgi-bin/cachemgr.cgi/
First, you should ensure that only specified workstations can access the cache manager. That is done in your CERN httpd.conf, not in squid.conf.
Protection MGR-PROT {
Mask @(workstation.example.com)
}
Wildcards are acceptable, IP addresses are acceptable, and others can be added with a comma-separated list of IP addresses. There are many more ways of protection. Your server documentation has details.
You also need to add:
Protect /Squid/* MGR-PROT
Exec /Squid/cgi-bin/*.cgi /usr/local/squid/bin/*.cgi
This marks the script as executable to those in MGR-PROT.
First, make sure the cgi-bin directory you're using is listed with a
ScriptAlias in your Apache srm.conf file like this:
ScriptAlias /Squid/cgi-bin/ /usr/local/squid/cgi-bin/
It's probably a bad idea to ScriptAlias
the entire usr/local/squid/bin/ directory where all the
Squid executables live.
Next, you should ensure that only specified workstations can access the cache manager. That is done in your Apache access.conf, not in squid.conf. At the bottom of access.conf file, insert:
<Location /Squid/cgi-bin/cachemgr.cgi>
order deny,allow
deny from all
allow from workstation.example.com
</Location>
You can have more than one allow line, and you can allow domains or networks.
Alternately, cachemgr.cgi can be password-protected. You'd add the following to access.conf:
<Location /Squid/cgi-bin/cachemgr.cgi>
AuthUserFile /path/to/password/file
AuthGroupFile /dev/null
AuthName User/Password Required
AuthType Basic
require user cachemanager
</Location>
Consult the Apache documentation for information on using htpasswd to set a password for this ``user.''
The default cache manager access configuration in squid.conf is:
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl all src 0.0.0.0/0.0.0.0
With the following rules:
http_access deny manager !localhost
http_access allow all
The first ACL is the most important as the cache manager program
interrogates squid using a special cache_object protocol.
Try it yourself by doing:
telnet mycache.example.com 3128
GET cache_object://mycache.example.com/info HTTP/1.0
The default ACLs say that if the request is for a
cache_object, and it isn't the local host, then deny
access; otherwise allow access.
In fact, only allowing localhost access means that on the
initial cachemgr.cgi form you can only specify the cache
host as localhost. We recommend the following:
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl example src 123.123.123.123/255.255.255.255
acl all src 0.0.0.0/0.0.0.0
Where 123.123.123.123 is the IP address of your web server.
Then modify the rules like this:
http_access allow manager localhost
http_access allow manager example
http_access deny manager
http_access allow all
If you're using miss_access, then don't forget to also add
a miss_access rule for the cache manager:
miss_access allow manager
The default ACLs assume that your web server is on the same machine
as squid. Remember that the connection from the cache
manager program to squid originates at the web server, not the
browser. So if your web server lives somewhere else, you should
make sure that IP address of the web server that has cachemgr.cgi
installed on it is in the example ACL above.
Always be sure to send a SIGHUP signal to squid
any time you change the squid.conf file.
If you ``drop'' the list box, and browse it, you will see that the password is only required to shutdown the cache, and the URL is required to refresh an object (i.e., retrieve it from its original source again) Otherwise these fields can be left blank: a password is not required to obtain access to the informational aspects of cachemgr.cgi.
See the cachemgr_passwd directive in squid.conf.
Edit Makefile.in. Look at the line
HOST_OPT = # -DCACHEMGR_HOSTNAME="getfullhostname()"
If the webserver that cachemgr.cgi runs from is the same
machine as Squid runs on, just remove the #. If your web server
is somewhere else use:
HOST_OPT = -DCACHEMGR_HOSTNAME=\"mycache.example.com\"
If you change this, you will need to recompile and reinstall cachemgr.cgi before the changes take effect.
Browsers and caches use TCP connections to retrieve web objects from web servers or caches. UDP connections are used when another cache using you as a sibling or parent wants to find out if you have an object in your cache that it's looking for. The UDP connections are ICP queries.
Don't worry. The default (and sensible) behavior of squid is to expire an object when it happens to overwrite it. It doesn't explicitly garbage collect (unless you tell it to in other ways).
Entry describing an object in the cache.
An entry in the DNS cache.
Link in the cache hash table structure.
The strings of the URLs themselves that map to an object number in the cache, allowing access to the StoreEntry.
Basically just like the log file in your cache directory:
PoolMemObject structuresPool for Request structuresPool for in-memory object
If squid is much smaller than this field, run for cover! Something is very wrong, and you should probably restart squid.
Other?
Other is a default category to track objects which
don't fall into one of the defined categories.
Transfer KB/sec
column always zero?This column contains gross estimations of data transfer rates averaged over the entire time the cache has been running. These numbers are unreliable and mostly useless.
Object Count?
The number of objects of that type in the cache right now.
Max/Current/Min KB?
These refer to the size all the objects of this type have grown to/currently are/shrunk to.
I/O section about?
These are histograms on the number of bytes read from the network
per read(2) call. Somewhat useful for determining
maximum buffer sizes.
Objects section for?
Warning: this will download to your browser a list of every URL in the cache and statistics about it. It can be very, very large. Sometimes it will be larger than the amount of available memory in your client! You probably don't need this information anyway.
VM Objects section for?
VM Objects are the objects which are in Virtual Memory.
These are objects which are currently being retrieved and
those which were kept in memory for fast access (accelerator
mode).
AVG RTT mean?
Average Round Trip Time. This is how long on average after an ICP ping is sent that a reply is received.
A HIT means that the document was found in the cache. A MISS, that it wasn't found in the cache. A negative hit means that it was found in the cache, but it doesn't exist.
The hostname is the name that was requested to be resolved.
For the Flags column:
C Means positively cached.N Means negatively cached.P Means the request is pending being dispatched.D Means the request has been dispatched and we're waiting for an answer.L Means it is a locked entry because it represents a parent or sibling.The TTL column represents ``Time To Live'' (i.e., how long
the cache entry is valid). (May be negative if the document has
expired.)
The N column is the number of IP addresses from which
the cache has documents.
The rest of the line lists all the IP addresses that have been associated with that IP cache entry.
IPCache contains data for the Hostname to IP-Number mapping, and FQDNCache does it the other way round. For example:
IP Cache Contents:
Hostname Flags lstref TTL N [IP-Number]
gorn.cc.fh-lippe.de C 0 21581 1 193.16.112.73
lagrange.uni-paderborn.de C 6 21594 1 131.234.128.245
www.altavista.digital.com C 10 21299 4 204.123.2.75 ...
2/ftp.symantec.com DL 1583 -772855 0
Flags: C --> Cached
D --> Dispatched
N --> Negative Cached
L --> Locked
lstref: Time since last use
TTL: Time-To-Live until information expires
N: Count of addresses
FQDN Cache Contents:
IP-Number Flags TTL N Hostname
130.149.17.15 C -45570 1 andele.cs.tu-berlin.de
194.77.122.18 C -58133 1 komet.teuto.de
206.155.117.51 N -73747 0
Flags: C --> Cached
D --> Dispatched
N --> Negative Cached
L --> Locked
TTL: Time-To-Live until information expires
N: Count of names
This question was asked on the squid-users mailing list, to which there were three excellent replies.
You get a ``page fault'' when your OS tries to access something in memory which is actually swapped to disk. The term ``page fault'' while correct at the kernel and CPU level, is a bit deceptive to a user, as there's no actual error - this is a normal feature of operation.
Also, this doesn't necessarily mean your squid is swapping by that much. Most operating systems also implement paging for executables, so that only sections of the executable which are actually used are read from disk into memory. Also, whenever squid needs more memory, the fact that the memory was allocated will show up in the page faults.
However, if the number of faults is unusually high, and getting bigger, this could mean that squid is swapping. Another way to verify this is using a program called ``vmstat'' which is found on most UNIX platforms. If you run this as ``vmstat 5'' this will update a display every 5 seconds. This can tell you if the system as a whole is swapping a lot (see your local man page for vmstat for more information).
It is very bad for squid to swap, as every single request will be blocked until the requested data is swapped in. It is better to tweak the cache_mem and/or memory_pools setting in squid.conf, or switch to the NOVM versions of squid, than allow this to happen.
by Peter Wemm
There's two different operations at work, Paging and swapping. Paging is when individual pages are shuffled (either discarded or swapped to/from disk), while ``swapping'' generally means the entire process got sent to/from disk.
Needless to say, swapping a process is a pretty drastic event, and usually only reserved for when there's a memory crunch and paging out cannot free enough memory quickly enough. Also, there's some variation on how swapping is implemented in OS's. Some don't do it at all or do a hybrid of paging and swapping instead.
As you say, paging out doesn't necessarily involve disk IO, eg: text (code) pages are read-only and can simply be discarded if they are not used (and reloaded if/when needed). Data pages are also discarded if unmodified, and paged out if there's been any changes. Allocated memory (malloc) is always saved to disk since there's no executable file to recover the data from. mmap() memory is variable.. If it's backed from a file, it uses the same rules as the data segment of a file - ie: either discarded if unmodified or paged out.
There's also ``demand zeroing'' of pages as well that cause faults.. If you malloc memory and it calls brk()/sbrk() to allocate new pages, the chances are that you are allocated demand zero pages. Ie: the pages are not ``really'' attached to your process yet, but when you access them for the first time, the page fault causes the page to be connected to the process address space and zeroed - this saves unnecessary zeroing of pages that are allocated but never used.
The ``page faults with physical IO'' comes from the OS via getrusage(). It's highly OS dependent on what it means. Generally, it means that the process accessed a page that was not present in memory (for whatever reason) and there was disk access to fetch it. Many OS's load executables by demand paging as well, so the act of starting squid implicitly causes page faults with disk IO - however, many (but not all) OS's use ``read ahead'' and ``prefault'' heuristics to streamline the loading. Some OS's maintain ``intent queues'' so that pages can be selected as pageout candidates ahead of time. When (say) squid touches a freshly allocated demand zero page and one is needed, the OS can page out one of the candidates on the spot, causing a 'fault with physical IO' with demand zeroing of allocated memory which doesn't happen on many other OS's. (The other OS's generally put the process to sleep while the pageout daemon finds a page for it).
The meaning of ``swapping'' varies. On FreeBSD for example, swapping out is implemented as unlocking upages, kernel stack, PTD etc for aggressive pageout with the process. The only thing left of the process in memory is the 'struct proc'. The FreeBSD paging system is highly adaptive and can resort to paging in a way that is equivalent to the traditional swapping style operation (ie: entire process). FreeBSD also tries stealing pages from active processes in order to make space for disk cache. I suspect this is why setting 'memory_pools off' on the non-NOVM squids on FreeBSD is reported to work better - the VM/buffer system could be competing with squid to cache the same pages. It's a pity that squid cannot use mmap() to do file IO on the 4K chunks in it's memory pool (I can see that this is not a simple thing to do though, but that won't stop me wishing. :-).
by John Line
The comments so far have been about what paging/swapping figures mean in a ``traditional'' context, but it's worth bearing in mind that on some systems (Sun's Solaris 2, at least), the virtual memory and filesystem handling are unified and what a user process sees as reading or writing a file, the system simply sees as paging something in from disk or a page being updated so it needs to be paged out. (I suppose you could view it as similar to the operating system memory-mapping the files behind-the-scenes.)
The effect of this is that on Solaris 2, paging figures will also include file I/O. Or rather, the figures from vmstat certainly appear to include file I/O, and I presume (but can't quickly test) that figures such as those quoted by Squid will also include file I/O.
To confirm the above (which represents an impression from what I've read and observed, rather than 100% certain facts...), using an otherwise idle Sun Ultra 1 system system I just tried using cat (small, shouldn't need to page) to copy (a) one file to another, (b) a file to /dev/null, (c) /dev/zero to a file, and (d) /dev/zero to /dev/null (interrupting the last two with control-C after a while!), while watching with vmstat. 300-600 page-ins or page-outs per second when reading or writing a file (rather than a device), essentially zero in other cases (and when not cat-ing).
So ... beware assuming that all systems are similar and that paging figures represent *only* program code and data being shuffled to/from disk - they may also include the work in reading/writing all those files you were accessing...
You'll probably want to compare the number of page faults to the number of HTTP requests. If this ratio is close to, or exceeding 1, then Squid is paging too much.
This refers to ICP replies which Squid ignored, for one of these reasons: