[started by R. Saito, 2019.4.27]

* Checklist for the draft of the paper [#q0385eff]

tube42 is back (2012.1.30) 
- person in charge: nugraha, helped by hasdeo and tapsanit
- target: move motherboard of oldflex which is originally tube42's motherboard
**procedures [#c671f2ab]
+ preparation:
-- check the components of tube42: harddisk OK, power supply OK, special shaped cable OK, LED cable is matched with the other tube40's series
+ oldflex is turned off
-- remove all cables from the old flex box
-- remove the motherboard from the old flex
-- the empty box is kept at room 947
+ tube42 box is taken from tube40 big box
-- fan is turned off, other tube is turned off
-- motherboard can be put on the tube42 box
-- problem: oldflex motherboard screws do not match with the tube42 box
-- solution: use the appropriate screws from room 947 -> OK
-- plug in all the necessary cables correctly (HD, power, LED)
-- put again the tube42 box above tube41
-- connect network cable, display cable, mouse, keyboard.
-- turn on all the machines and fan.
-- close the box.
+ how to check it works?
--from tube42:
log in with root or your account
--from flex
 ssh tube42
+ cpu fan checking
--log in as root in tube42
--type following command to check initial temperature of all cpus
 sensors
--open another terminal, then log in to tube42 using your account
--run the program in your account
--in the previous terminal, type the same command to monitor the temperature while the program is running.
--check the temperature of cpu when the program is finished, the temperature should decrease indicating that the heat is being moved out from the cpu.
--following is the result of checking: The temperature of all cpus is recorded after running of exciton program for 30 min. (+30). When the program is stopped for 30 min (-30), the temperature is also recorded. The decreasing of temperature of cpu indicates that the cpu fan is working correctly.
|core (cpu)|intial temp.(C)|+30 min. temp.(C)|-30 min. temp.(C)|h
|0|		 +37.0|	      +75.0| 	  +38.0|
|1| 		 +38.0|       +69.0|      +38.0|
|2|              +35.0|       +73.0|      +36.0|
|3|              +34.0|       +65.0|      +35.0|
|4|              +38.0|       +73.0|      +38.0|
|5|              +36.0|       +65.0|      +37.0|
|6|              +35.0|       +74.0|      +36.0|
|7|              +34.0|       +66.0|      +35.0|
|8|              +38.0|       +75.0|      +39.0|
|9|              +38.0|       +70.0|      +38.0|
|10|             +36.0|       +73.0|      +36.0|
|11|             +34.0|       +66.0|      +35.0|
|12|             +38.0|       +73.0|      +38.0|
|13|             +36.0|       +65.0|      +37.0|
|14|             +35.0|       +73.0|      +36.0|
|15|             +34.0|       +66.0|      +35.0|

Front page   New Page list Search Recent changes   Help   RSS of recent changes